Lippert J-13 Slide-Out Service Roller Assembly - 115622
Ready to order
Lippert J-13 Slide-Out Service Roller Assembly - 115622
---
Lippert J-13 Slide-Out Service Roller 115622
Replace the matching service roller in a Lippert slide-out with J-13 assembly 115622. Its nylon roller is carried by a steel base, and the elongated mounting holes allow placement adjustment to suit the original installation. Matching the roller style and dimensions is essential to maintaining the intended support as the slide-out moves in and out.
This listing supplies one assembly containing the roller, base, shaft and two push nuts. A complete slide-out system and separate installation screws are not itemized as included. Lippert recommends professional assistance from the original RV manufacturer and checking the RV manual before ordering.
Why Choose This Exact Roller?
- J-13 service identity: exact Lippert replacement part 115622
- Nylon roller: rolls against the supported slide-out surface
- Steel base: supports the roller and shaft
- Elongated mounting slots: allow placement adjustment to the installation requirements
- Assembly components: roller, base, shaft and two push nuts
- Published dimensions: 1.3282-inch height, 4.1765-inch width and 2.7-inch depth
Technical Specifications
- SKU: 115622
- Brand: Lippert
- Product Color: Black
- Hardware Type: Roller
- Country of Origin: USA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- UPC: 848150060464
- Shipping Dimensions: 4.5" L x 3" W x 1.5" H, 1.5 lbs.
- Service Roller Type: J-13
- Roller Material: Nylon
- Base Material: Steel
- Assembly Height (Inches): 1.3282
- Assembly Width (Inches): 4.1765
- Assembly Depth (Inches): 2.7
- Roller Length (Inches): 3.75
- Included Components: Roller, base, shaft and two push nuts
Before You Order
Confirm J-13 and Lippert 115622 in the installed slide-out's service record. Lippert states that this roller is compatible with multiple Lippert slide-out systems, but the reviewed page does not name exact parent assemblies. A similar-looking roller or a shared brand is not enough to establish fit.
Compare the mounting base, available clearance, roller position and the original equipment dimensions. The source gives a 3-3/4-inch roller and overall assembly dimensions of 1.3282 inches high, 4.1765 inches wide and 2.7 inches deep. It does not give mounting-slot spacing, screw size, load rating, roller diameter, vehicle-side assignment or a lubrication procedure.
Compare Roller Styles
The J-2 roller assembly 115612 has a different published height and base depth. The J-36 floor-edge roller 276288 uses a curved bracket with a lip for the floor edge. They are linked to help identify the correct service style; neither is established as an interchangeable replacement for J-13.
Product Images and Installation
The gallery includes three original studio views of the roller assembly, a feature graphic, representative interior and exterior slide-out scenes, a campsite trailer photo and a Lippert genuine-parts graphic. The representative scenes do not document this roller installed in a specific RV model.
The product's support link opens Lippert's general support homepage rather than a directly linked J-13 installation manual or exact component diagram. Contact the original RV manufacturer's service department for the procedure and placement requirements for the installed system. Do not select the number or location of rollers from a generic gallery image.
Shipping Measurements
Lippert lists a 4.5 x 3 x 1.5-inch shipping package and a shipping weight of 1.5 lb. These are packed measurements, separate from the assembly dimensions above.
California Proposition 65 Warning
WARNING: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 115622 |
|---|---|
| Brand | Lippert |
| Product color | Black |
| Hardware type | Roller |
| Country of origin | USA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Upc | 848150060464 |
| Shipping dimensions | 4.5" L x 3" W x 1.5" H, 1.5 lbs. |
| Service roller type | J-13 |
| Roller material | Nylon |
| Base material | Steel |
| Assembly height (inches) | 1.3282 |
| Assembly width (inches) | 4.1765 |
| Assembly depth (inches) | 2.7 |
| Roller length (inches) | 3.75 |
| Included components | Roller, base, shaft and two push nuts |
- What is included? One assembly with roller, base, shaft and two push nuts. The source does not itemize installation screws or a complete slide-out system.
- Which materials are listed? Lippert identifies a nylon roller secured to a solid steel plate. The product color is black.
- What are the assembly dimensions? The quick facts list 1.3282 inches high, 4.1765 inches wide, 2.7 inches deep and a 3-3/4-inch roller. These are separate from the shipping box.
- Does it fit every lippert slide-out? The source says multiple Lippert slide-out systems and instructs buyers to check the RV manual. Exact numbered parent assemblies are not identified in the reviewed page.
- Are j-2 and j-36 interchangeable with j-13? No interchangeability is established. J-2 has different published dimensions; J-36 uses a floor-edge bracket with a lip.
- How should it be installed? Lippert recommends professional assistance from the original RV manufacturer. Use the installed system service instructions for placement and fasteners.
- What do the slots do? The elongated mounting holes allow placement adjustment. Slot spacing, fastener size and tightening specifications are not published on the reviewed page.
- What origin, warranty and shipping data are listed? USA origin and a one-year warranty term. The package measures 4.5 x 3 x 1.5 inches and shipping weight is 1.5 lb.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.









