Lippert IDS Slide-Out Control Box with Harness - 138450
Ready to order
Lippert IDS Slide-Out Control Box with Harness - 138450
---
Lippert IDS Slide-Out Control Box with Harness - 138450
Lippert 138450 is an IDS replacement programming control box with harness for the source-described 2 x 3 Center Drive Electric Slide-System. It replaces Lippert 116979. Use the original system and controller identification to confirm the match before ordering; a generic electric slide-out label does not establish compatibility.
This listing supplies the control box with harness identified in the manufacturer title. The manufacturer illustration shows a rectangular housing and attached wire leads. It is a replacement control component, not a complete slide-out assembly, motor, actuator or room mechanism. The focused source page does not provide an itemized installation kit or programming procedure.
Why Choose This IDS Control Box?
- IDS replacement component: source identifies a programming control box for the 2 x 3 Center Drive Electric Slide-System.
- Harness identified: title specifies the control box with harness; illustration shows attached leads.
- Predecessor reference: Lippert lists 116979 as the superseded SKU.
- Original-system matching: verify controller and slide-system identification before substitution.
- Single listed package: quantity one, sold each, with the source-listed one-year warranty under manufacturer terms.
Technical Specifications
- SKU: 138450
- Brand: Lippert
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Supersedes SKU: 116979
- Shipping Dimensions: 6" L x 4" W x 4" H, 1 lbs.
Before You Order
Match the original IDS center-drive slide-system identification, controller number, harness and mounting arrangement. Keep the exact wiring and programming instructions available; verify any required setup with qualified service support.
What system is this box for?
The exact source description is Replacement Programming Control Box 2 x 3 Center Drive Electric Slide-System. Match the original IDS system and controller identification. The 2 x 3 wording is a system designation on the source, not a housing-size or number-of-rooms specification. No exact parent slide-out SKU is named.
Which part does it replace?
Lippert lists 116979 in the Supersedes SKU field. Confirm the original assembly and wiring before substitution; no additional predecessor or OEM cross-reference number is supplied on this focused page.
What is included?
The title identifies the IDS control box with harness, and the illustration shows the box with attached wire leads. A motor, actuator, wall switch, mounting hardware, complete slide mechanism or separate connector kit is not itemized as included. The image does not establish connector terminals, wire lengths or pin assignments.
What voltage or current does it use?
The focused source page supplies no voltage, current, fuse size, wire gauge or pinout specification. Confirm the exact original system and installation instructions. Do not transfer electrical ratings from other Lippert, Power Gear or in-wall controllers.
Does it arrive programmed?
The source calls it a programming control box but does not state that it arrives pre-programmed, identify a setup sequence or give replacement calibration instructions. Obtain the correct system procedure before installation; no reset, stop-setting or wiring sequence is inferred here.
Are manuals linked on this page?
The product page links general Lippert support rather than an exact installation PDF. Use the original IDS slide-system instructions and qualified service assistance to confirm wiring, installation and programming. Similar-looking control boxes are not established substitutes.
What measurements are available?
Shipping dimensions are 6 x 4 x 4 inches with shipping weight 1 pound. Those are package figures, not housing dimensions, mounting-hole spacing or harness length. The illustration is not a dimensioned installation drawing.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 138450 |
|---|---|
| Brand | Lippert |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Supersedes sku | 116979 |
| Shipping dimensions | 6" L x 4" W x 4" H, 1 lbs. |
- What system is this box for? The exact source description is Replacement Programming Control Box 2 x 3 Center Drive Electric Slide-System. Match the original IDS system and controller identification. The 2 x 3 wording is a system designation on the source, not a housing-size or number-of-rooms specification. No exact parent slide-out SKU is named.
- Which part does it replace? Lippert lists 116979 in the Supersedes SKU field. Confirm the original assembly and wiring before substitution; no additional predecessor or OEM cross-reference number is supplied on this focused page.
- What is included? The title identifies the IDS control box with harness, and the illustration shows the box with attached wire leads. A motor, actuator, wall switch, mounting hardware, complete slide mechanism or separate connector kit is not itemized as included. The image does not establish connector terminals, wire lengths or pin assignments.
- What voltage or current does it use? The focused source page supplies no voltage, current, fuse size, wire gauge or pinout specification. Confirm the exact original system and installation instructions. Do not transfer electrical ratings from other Lippert, Power Gear or in-wall controllers.
- Does it arrive programmed? The source calls it a programming control box but does not state that it arrives pre-programmed, identify a setup sequence or give replacement calibration instructions. Obtain the correct system procedure before installation; no reset, stop-setting or wiring sequence is inferred here.
- Are manuals linked on this page? The product page links general Lippert support rather than an exact installation PDF. Use the original IDS slide-system instructions and qualified service assistance to confirm wiring, installation and programming. Similar-looking control boxes are not established substitutes.
- What measurements are available? Shipping dimensions are 6 x 4 x 4 inches with shipping weight 1 pound. Those are package figures, not housing dimensions, mounting-hole spacing or harness length. The illustration is not a dimensioned installation drawing.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


