Lippert Hydraulic Power Unit Solenoid - Winnebago Reference 18223101705 - 161394
Ready to order
Lippert Hydraulic Power Unit Solenoid - Winnebago Reference 18223101705 - 161394
---
Lippert Hydraulic Power Unit Solenoid - Winnebago Reference 18223101705 - 161394
Lippert 161394 is a replacement solenoid for a hydraulic power unit. The manufacturer identifies Winnebago part number 18223101705 and lists one unit per package. Match the original solenoid and hydraulic power-unit identification before ordering; the focused page does not identify an exact power-unit model or publish electrical ratings.
Why Choose This Solenoid?
- Genuine Lippert service part identified by SKU 161394.
- Manufacturer cross-reference: Winnebago part number 18223101705.
- Solenoid replacement scope; a complete hydraulic power unit is not listed as included.
- Quantity one, sold by the each.
- Manufacturer specification lists Country of Origin: USA.
- One-year warranty term listed by Lippert; coverage follows manufacturer terms.
Technical Specifications
- SKU: 161394
- Brand: Lippert
- Warranty Term: 1 Year
- Quantity In Package: 1
- Country of Origin: USA
- Unit of Measure: EA
- Winnebago Part Number: 18223101705
- Shipping Dimensions: 9" L x 5" W x 2.5" H, 1 lbs.
Before You Order
Match Lippert 161394, the original solenoid identification, power-unit model, electrical ratings, terminal arrangement and mounting configuration. A similar-looking solenoid is not sufficient evidence of compatibility.
What is included?
Lippert lists one solenoid for a hydraulic power unit. The source image shows the solenoid body with threaded terminals and an attached metal mounting bracket. Separate nuts, bolts, wiring, cable lugs, reservoir, motor and pump are not itemized as included. Match the original installation rather than relying on unlisted hardware.
Which identifiers should I match?
Use Lippert SKU 161394 and the manufacturer-listed Winnebago reference 18223101705. Confirm both the original solenoid identification and power-unit identification. A Winnebago reference alone does not establish fit for every Winnebago coach or hydraulic system.
Which hydraulic power units does it fit?
The focused manufacturer page calls this a solenoid for a hydraulic power unit but names no exact power-unit model or parent SKU. Its placement in the leveling-parts catalog is not a model-specific compatibility claim. Confirm fit from the original assembly identification before ordering.
What voltage and current rating does it have?
The focused page does not state coil voltage, current capacity, duty cycle or contact configuration. These values cannot be determined from terminal appearance. Match the original electrical specifications and service instructions; no 12-volt or other electrical rating is inferred.
What are the dimensions and weight?
Lippert publishes shipping dimensions of 9 x 5 x 2.5 inches and a shipping weight of 1 pound. These describe the package, not installed solenoid dimensions or net weight. Terminal sizes, mounting-hole spacing and bracket dimensions are not specified.
Is this a complete hydraulic power unit?
No. This listing is for the solenoid service part only. The page does not list a hydraulic pump, motor, reservoir, valves, hoses or control system as supplied. It does not establish that replacing this part will resolve a particular hydraulic-system fault.
Are wiring instructions or a manual supplied?
No exact solenoid PDF or wiring diagram is linked in the focused Support area; it leads to general Lippert support resources. Follow the original hydraulic power-unit service instructions for circuit identification, safe power isolation and reconnection. No terminal assignment, wiring procedure or fastener torque is inferred.
What origin and warranty are listed?
The manufacturer specification table lists Country of Origin: USA and a one-year warranty term. Warranty coverage is subject to the manufacturer terms. No additional material, weatherproofing or performance rating is stated on this page.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 161394 |
|---|---|
| Brand | Lippert |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Country of origin | USA |
| Unit of measure | EA |
| Winnebago part number | 18223101705 |
| Shipping dimensions | 9" L x 5" W x 2.5" H, 1 lbs. |
- What is included? Lippert lists one solenoid for a hydraulic power unit. The source image shows the solenoid body with threaded terminals and an attached metal mounting bracket. Separate nuts, bolts, wiring, cable lugs, reservoir, motor and pump are not itemized as included. Match the original installation rather than relying on unlisted hardware.
- Which identifiers should i match? Use Lippert SKU 161394 and the manufacturer-listed Winnebago reference 18223101705. Confirm both the original solenoid identification and power-unit identification. A Winnebago reference alone does not establish fit for every Winnebago coach or hydraulic system.
- Which hydraulic power units does it fit? The focused manufacturer page calls this a solenoid for a hydraulic power unit but names no exact power-unit model or parent SKU. Its placement in the leveling-parts catalog is not a model-specific compatibility claim. Confirm fit from the original assembly identification before ordering.
- What voltage and current rating does it have? The focused page does not state coil voltage, current capacity, duty cycle or contact configuration. These values cannot be determined from terminal appearance. Match the original electrical specifications and service instructions; no 12-volt or other electrical rating is inferred.
- What are the dimensions and weight? Lippert publishes shipping dimensions of 9 x 5 x 2.5 inches and a shipping weight of 1 pound. These describe the package, not installed solenoid dimensions or net weight. Terminal sizes, mounting-hole spacing and bracket dimensions are not specified.
- Is this a complete hydraulic power unit? No. This listing is for the solenoid service part only. The page does not list a hydraulic pump, motor, reservoir, valves, hoses or control system as supplied. It does not establish that replacing this part will resolve a particular hydraulic-system fault.
- Are wiring instructions or a manual supplied? No exact solenoid PDF or wiring diagram is linked in the focused Support area; it leads to general Lippert support resources. Follow the original hydraulic power-unit service instructions for circuit identification, safe power isolation and reconnection. No terminal assignment, wiring procedure or fastener torque is inferred.
- What origin and warranty are listed? The manufacturer specification table lists Country of Origin: USA and a one-year warranty term. Warranty coverage is subject to the manufacturer terms. No additional material, weatherproofing or performance rating is stated on this page.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


