Lippert Hall Effect Sensor to Control Board Harness - 35 ft - 243688
Ready to order
Lippert Hall Effect Sensor to Control Board Harness - 35 ft - 243688
---
Lippert Hall Effect Sensor-to-Control-Board Harness, 35 ft (Part 243688)
This genuine Lippert wiring harness carries the signal from a Hall Effect sensor back to the leveling control board. The Hall Effect sensor is what lets the controller count jack travel, so a pinched, corroded or rodent-chewed harness is a common reason a Lippert leveling system loses track of a jack or throws a sensor fault. Part 243688 is the 35-foot harness, sized for runs where the jack sits a long way from the controller.
The harness works with both 4-point and 6-point control boards and ends in a sealed 3-pin Deutsch DT06 connector. It is the harness only: the Hall Effect sensor and the control module are sold separately. Lippert lists 243688 as the current replacement for the earlier part number 286825.
Why Choose This Lippert Hall Effect Harness
- Genuine Lippert part: the factory replacement harness, not a spliced or universal lead
- 35 ft length: reaches from the control board to far jack locations without joining two harnesses
- Works with 4-point and 6-point boards: one harness part number covers both control board types
- Sealed Deutsch DT06 connector: 3-pin weather-resistant plug that mates with the factory sensor lead
- Current part number: supersedes Lippert 286825, so it is the harness Lippert supplies today
- One-year Lippert warranty: backed by the manufacturer
Technical Specifications
- Lippert Part Number: 243688
- Replaces: 286825
- Length: 35 ft
- Connector: 3-pin Deutsch DT06
- Control Board Compatibility: 4-point or 6-point
- Included: one wire harness (sensor and control module not included)
- UPC: 848150048066
- Warranty: 1 year
- Shipping Size: 18" x 12" x 3", 1 lb
OEM Cross-Reference Part Numbers
RV manufacturers stock this same Lippert harness under their own part numbers. If your parts list shows one of these, 243688 is the Lippert part behind it:
- Grand Design: 160012
- Heartland: 0264882
- Jayco: 0291116
- Keystone RV: 383820
- Thor: 0310569
- Winnebago: 182236-05-000
Before You Order
- Match the part number. Check the tag on your existing harness or your RV maker's parts list against 243688 or 286825.
- Measure the routed path. Follow the old harness along the frame from the jack to the control board; do not measure the straight-line distance.
- Check the plug. Confirm your sensor lead uses a 3-pin Deutsch DT06 connector.
- Inspect the sensor too. If the harness was damaged by heat or water, look at the Hall Effect sensor before powering the system back up.
Related Lippert Leveling Parts
Working on the rest of the leveling system? These are in the same family of Lippert leveling parts. Confirm each by its own part number before ordering:
- Lippert Ground Control TT Automatic Leveling System (672136) - complete travel trailer leveling system
- Lippert Touch Pad Multi-Motor Sync and Diagnostic Controller (1510000124) - leveling system control board
- All RV leveling system parts
| Lippert part number | 243688 |
|---|---|
| Replaces | 286825 |
| Length | 35 ft |
| Connector | 3-pin Deutsch DT06 |
| Control board compatibility | 4-point or 6-point |
| Included | Wire harness only |
| Upc | 848150048066 |
| Warranty | 1 year |
| Shipping weight | 1 lb |
| Shipping dimensions | 18 x 12 x 3 in |
- What does this harness connect? It connects a Hall Effect sensor to the leveling control board, so the controller can read that sensor's signal.
- Does it work with both 4-point and 6-point leveling systems? Yes. Lippert lists part 243688 as compatible with 4-point and 6-point control boards.
- Is the hall effect sensor or control module included? No. This listing is the 35 ft wire harness only. The sensor and the control module are sold separately.
- What part number does 243688 replace? Lippert lists 243688 as the replacement for the earlier part number 286825.
- What connector does the harness use? It uses a sealed 3-pin Deutsch DT06 connector. Check that your sensor lead has the matching plug before ordering.
- Which rv brand part numbers cross to this harness? Grand Design 160012, Heartland 0264882, Jayco 0291116, Keystone 383820, Thor 0310569 and Winnebago 182236-05-000.
Ready to order
Lippert Hall Effect Sensor to Control Board Harness - 35 ft - 243688
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.