Lippert Ground Control 3.0 Rear Jack Foot Pad, 9-inch - 377962
---
Nine-Inch Rear Hall Effect Jack Foot Pad
Lippert 377962 is a nine-inch round replacement foot pad for a rear Hall Effect jack on the Ground Control 3.0 fifth-wheel leveling system. The page specifies a nominal two-inch tube fit. One foot pad is included; the jack is not included.
The manufacturer photo shows a black round pad with a raised tube socket and side openings. Original dimension and feature graphics are retained in the gallery. Photos showing a complete jack installed under an RV are representative usage illustrations, not additional included equipment.
Why Choose This Part?
- Rear Hall Effect application: identified for Ground Control 3.0 fifth-wheel leveling jacks.
- Nine-inch round footprint: helps spread jack support over a larger ground-contact area.
- Nominal two-inch tube fit: compare the original rear jack and foot-pad connection.
- Manufacturer dimension graphic: approximate 2.04-inch socket inside diameter, 2.29-inch outside diameter and 2.25-inch overall height.
- Foot pad only: replaces the pad without supplying an entire jack or leveling system.
- Cross-reference information: Jayco 0282121 and Keystone RV 498202 are listed by Lippert.
Technical Specifications
- SKU: 377962
- Brand: Lippert
- Application: Rear Hall Effect jack on Ground Control 3.0 fifth-wheel system
- Foot Pad Diameter: 9 inches
- Nominal Tube Fit: 2 inches (product-page statement)
- Approximate Socket Inside Diameter: 2.04 inches (manufacturer graphic)
- Approximate Socket Outside Diameter: 2.29 inches (manufacturer graphic)
- Approximate Overall Height: 2.25 inches (manufacturer graphic)
- Included: One rear jack foot pad only
- Warranty Term: 1 Year
- Quantity In Package: 1
- Country of Origin: CHN
- Hardware Type: Footpad
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Jayco Part Number: 0282121
- Keystone RV Part Number: 498202
- UPC: 848150058102
- Shipping Dimensions: 14" L x 14" W x 4" H, 4.32 lbs.
Before You Order
Confirm Lippert 377962, rear Hall Effect jack application and Ground Control 3.0 fifth-wheel system. Compare the original foot pad diameter, tube connection and attachment openings. The product page does not specify mounting-hole diameter, fastener size, torque, material grade or a load rating for this pad. Its Support link opens a Ground Control Travel Trailer support category; that destination alone does not extend the stated fifth-wheel fitment.
Which leveling system is this foot pad for?
Lippert identifies 377962 for rear Hall Effect jacks on the Ground Control 3.0 fifth-wheel system. The page does not identify exact individual jack part numbers or establish universal fit for every Ground Control product.
What is included?
One rear jack foot pad is included. The jack is expressly excluded. Mounting fasteners, pins and a complete leveling system are not listed in the package contents.
What are the foot pad dimensions?
The pad is nine inches in diameter. The manufacturer graphic gives approximate dimensions of 2.25 inches overall height, 2.29 inches socket outside diameter and 2.04 inches socket inside diameter.
Why does the page say two inches but the drawing says 2.04 inches?
The product page describes a nominal two-inch tube fit, while the graphic labels an approximate 2.04-inch socket inside diameter. Match your original part and connection rather than treating the nominal fit statement as an exact manufactured measurement.
Does it fit front jacks or hydraulic leveling jacks?
The source identifies this as a rear Hall Effect Ground Control 3.0 fifth-wheel foot pad. Front-jack, hydraulic-jack and other leveling-system compatibility is not established by the focused source.
Are 14 x 14 x 4 inches the foot pad size?
No. Those are published shipping dimensions, with a 4.32-pound shipping weight. Physical pad and socket dimensions are listed separately. The installed-jack photos are representative illustrations; the jack is not included.
| Sku | 377962 |
|---|---|
| Brand | Lippert |
| Application | Rear Hall Effect jack on Ground Control 3.0 fifth-wheel system |
| Foot pad diameter | 9 inches |
| Nominal tube fit | 2 inches (product-page statement) |
| Approximate socket inside diameter | 2.04 inches (manufacturer graphic) |
| Approximate socket outside diameter | 2.29 inches (manufacturer graphic) |
| Approximate overall height | 2.25 inches (manufacturer graphic) |
| Included | One rear jack foot pad only |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Country of origin | CHN |
| Hardware type | Footpad |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Jayco part number | 0282121 |
| Keystone rv part number | 498202 |
| Upc | 848150058102 |
| Shipping dimensions | 14" L x 14" W x 4" H, 4.32 lbs. |
- Which leveling system is this foot pad for? Lippert identifies 377962 for rear Hall Effect jacks on the Ground Control 3.0 fifth-wheel system. The page does not identify exact individual jack part numbers or establish universal fit for every Ground Control product.
- What is included? One rear jack foot pad is included. The jack is expressly excluded. Mounting fasteners, pins and a complete leveling system are not listed in the package contents.
- What are the foot pad dimensions? The pad is nine inches in diameter. The manufacturer graphic gives approximate dimensions of 2.25 inches overall height, 2.29 inches socket outside diameter and 2.04 inches socket inside diameter.
- Why does the page say two inches but the drawing says 2.04 inches? The product page describes a nominal two-inch tube fit, while the graphic labels an approximate 2.04-inch socket inside diameter. Match your original part and connection rather than treating the nominal fit statement as an exact manufactured measurement.
- Does it fit front jacks or hydraulic leveling jacks? The source identifies this as a rear Hall Effect Ground Control 3.0 fifth-wheel foot pad. Front-jack, hydraulic-jack and other leveling-system compatibility is not established by the focused source.
- Are 14 x 14 x 4 inches the foot pad size? No. Those are published shipping dimensions, with a 4.32-pound shipping weight. Physical pad and socket dimensions are listed separately. The installed-jack photos are representative illustrations; the jack is not included.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.









