Lippert Ground Control 2.0 Standard Landing Gear Leg - 241846
Ready to order
Lippert Ground Control 2.0 Standard Landing Gear Leg - 241846
---
Lippert Ground Control 2.0 Standard Landing Gear Leg - 241846
Lippert 241846 is one standard heavy-duty fifth-wheel landing gear jack leg for Ground Control 2.0. The manufacturer identifies 900-56RFL with a 32-inch range, an 8,000-lb static rating and a separate 4,000-lb dynamic rating.
Package quantity is one landing gear leg. The photo shows the leg tube, mounting tabs, upper horizontal shaft and lower pin holes. A motor, gearbox, round footpad, separate brackets, pull pins and complete leveling controls are not itemized as included; the system diagram lists those components separately.
Why Choose This Part?
- Configuration: Standard Ground Control 2.0 landing gear leg.
- Range: Manufacturer lists 32 inches.
- Static support: 8,000-lb static rating.
- Dynamic operation: 4,000-lb dynamic rating; do not substitute the static number.
- Identification: 900-56RFL in the source description and 241846 at callout A.
Technical Specifications
- SKU: 241846
- Brand: Lippert
- Series: Ground Control® 2.0
- Weight Capacity: 8,000 lbs.
- Warranty Term: 1 Year
- Quantity In Package: 1
- Country of Origin: CHN
- Unit of Measure: EA
- Jayco Part Number: 0235480
- Keystone RV Part Number: 373473
- UPC: 848150048240
- Shipping Dimensions: 44.5" L x 10.5" W x 7" H, 29 lbs.
Before You Order
CCD-0003778 identifies 241846 as Standard Landing Gear at callout A, separately from extended leg 241845 and leveling jack 241844. Match the original Ground Control 2.0 leg label, standard length, mounting tabs, shaft interface, footpad/drop-leg arrangement and required ratings. Manufacturer cross-references are Jayco 0235480 and Keystone RV 373473. Neither a shared capacity nor a similar tube establishes an exact RV-model or Ground Control 3.0/TT substitution.
Installation and Reference Notes
The linked Ground Control 2.0 owner manual is a system operation and safety reference, not a complete part-replacement procedure. Chock the wheels, keep people clear and have the vehicle supported at the front and rear on appropriate jack stands before service. The leveling system must not be used as the sole support for tire changes or under-vehicle work; never lift all wheels clear of the ground. Follow the matched system service instructions and have a qualified technician confirm the repair. The assembly sheet depicts separate motor, gearbox, leg, brackets and footpad; pictures of a complete system do not itemize those pieces as included with this replacement. The 32-inch range is the source term, not a verified closed-body length, full installed height or independent screw-stroke measurement. The 44.5 x 10.5 x 7-inch, 29-lb shipping reference must not be used as mounting geometry. The leg rating does not increase the complete system or vehicle ratings; respect the lowest applicable rating.
Published shipping reference: 44.5" L x 10.5" W x 7" H, 29 lbs. These are transport data, not installed dimensions.
Related Parts
Browse related parts. Verify dimensions and application separately before selecting another item.
Manuals and Documents
| Sku | 241846 |
|---|---|
| Brand | Lippert |
| Series | Ground Control® 2.0 |
| Weight capacity | 8,000 lbs. |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Country of origin | CHN |
| Unit of measure | EA |
| Jayco part number | 0235480 |
| Keystone rv part number | 373473 |
| Upc | 848150048240 |
| Shipping dimensions | 44.5" L x 10.5" W x 7" H, 29 lbs. |
- What is the difference between the two ratings? The exact page gives 8,000 lb static and 4,000 lb dynamic. The static support value is not the dynamic lifting rating and does not increase the overall system rating.
- Is this the short or extended version? This SKU is the standard landing gear leg, identified as 900-56RFL. The component chart lists extended 241845 and leveling jack 241844 separately.
- Is a motor or footpad supplied? Only one leg is itemized. Motor, gearbox, footpad and other system components are listed separately in the diagram; do not assume they are included.
- Does 32 inches mean the closed length? The source calls it a 32-inch range. It does not provide a closed-body length or a complete mounting drawing.
- Can it support the rv during tire replacement? The owner manual prohibits using the leveling system alone for under-coach service or tire changes. Use suitable independent support and follow the matched safety procedure.
- Which oem reference numbers are given? Jayco 0235480 and Keystone RV 373473. Confirm the original part and mounting configuration; those references are not a universal vehicle-model list.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


