Lippert Coach Step Triple Gear Plate Assembly - 164348
Ready to order
Lippert Coach Step Triple Gear Plate Assembly - 164348
---
Coach Step Motorized Triple-Step Gear Plate
Lippert 164348 is listed as a replacement motorized triple-step gear plate for Coach Step RV entry steps. It is a mechanical drive component, offered as one gear plate assembly rather than a complete step, motor or control module.
Confirm the exact gear-plate version before ordering. Lippert’s linked Coach Step documentation identifies 164348 as the triple gear plate, but warns that the illustrated legacy plate, if damaged, requires replacement of the entire step assembly. The older owner’s manual also describes that illustrated version as unavailable. The current product page offers 164348; this does not establish interchangeability with every legacy plate.
Why Choose This Coach Step Gear Plate?
- Coach Step application: Product page identifies a motorized triple-step gear plate.
- Exact part identification: Lippert SKU 164348; quantity one, sold each.
- Mechanical assembly: Original manufacturer photo shows a toothed sector plate and raised hub.
- Separate gear-plate types: Documentation distinguishes triple, single/double and sliding-step plates.
- Made in the USA: Manufacturer country-of-origin specification.
- One-year warranty: Manufacturer lists a one-year warranty term.
Technical Specifications
- SKU: 164348
- Brand: Lippert
- Series: Coach Step®
- Hardware Type: Plate/Tie
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Shipping Dimensions: 6.8" L x 6.05" W x 1.7" H, 2.8 lbs.
- Application stated on product page: Motorized triple Coach Step
- Parts-diagram reference: CCD-0003507 page 3, callout N
- Legacy-version caution: Diagram warns illustrated damaged gear plate may require entire step assembly replacement; verify version with Lippert.
Before You Order
Identify the complete Coach Step assembly and compare the original gear plate with the manufacturer diagram. Ask Lippert to confirm whether your legacy version can accept the currently offered 164348 or needs a complete step replacement. No exact parent step model or RV model fit is established here. Do not substitute a single/double, sliding-step, Kwikee or Solid Step part based on appearance.
What is included?
One Coach Step gear plate assembly, SKU 164348, is listed. A complete step, electric motor, control module, wiring, linkage and separate mounting-hardware kit are not promised with this SKU.
Does this fit every triple Coach Step?
No universal fit is established. The page identifies a triple-step application, but the linked diagram carries a version-specific warning. Match the original step identification, plate shape, hub and attachment details, and obtain Lippert confirmation for your version.
Why does the manual say the entire step may need replacement?
The 2018 owner’s manual, page 11, identifies 164348 at callout F and says the illustrated version is unavailable; if damaged, the entire step assembly must be replaced. The 2023 components diagram, page 3 callout N, repeats the whole-assembly replacement warning. The current sale page does not explain which version its offered plate services. Confirm the repair path with Lippert before ordering.
Is this the same plate as 301696 or 165983?
The parts diagram labels 301696 as the single/double gear plate, 164348 as the triple gear plate and 165983 as the sliding-step gear plate. They are separate part numbers; shared Coach Step branding or a similar photo does not establish interchangeability.
Is the photo enough to confirm fit?
Use the original manufacturer photo as a visual reference, together with the exact assembly identification and the linked components diagram. The diagram distinguishes plate configurations, and the current page gives no bore, tooth-count or mounting-hole measurements. Appearance alone is insufficient.
Can I replace the plate while the steps remain installed?
Lippert TI-145 states that gear-plate or gear-plate-bolt replacement requires removal of the Coach Step assembly from the coach. The procedure addresses threadlocker and a possible tack weld. Have the work assessed and performed by a qualified technician using the manufacturer instructions and the correct assembly version.
What are the plate dimensions?
The focused source does not publish installed plate dimensions, hub bore, tooth count, mounting-hole spacing or torque. The 6.8 x 6.05 x 1.7-inch dimensions and 2.8-pound weight are explicitly shipping-package data.
Which documents should I check?
Review the Coach Step components diagram (CCD-0003507, page 3), the Coach Step owner’s manual (CCD-0001619, pages 5 and 11) and TI-145 (CCD-0002038). Their general service instructions do not override the legacy-version replacement warning.
Compare Other Coach Step Gear Plates
The 301696 single/double gear plate and 165983 sliding-step gear plate are separate applications in the manufacturer diagram, not confirmed substitutes for 164348.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
Manuals and Documents
| Sku | 164348 |
|---|---|
| Brand | Lippert |
| Series | Coach Step® |
| Hardware type | Plate/Tie |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Shipping dimensions | 6.8" L x 6.05" W x 1.7" H, 2.8 lbs. |
| Application stated on product page | Motorized triple Coach Step |
| Parts-diagram reference | CCD-0003507 page 3, callout N |
| Legacy-version caution | Diagram warns illustrated damaged gear plate may require entire step assembly replacement; verify version with Lippert. |
- What is included? One Coach Step gear plate assembly, SKU 164348, is listed. A complete step, electric motor, control module, wiring, linkage and separate mounting-hardware kit are not promised with this SKU.
- Does this fit every triple coach step? No universal fit is established. The page identifies a triple-step application, but the linked diagram carries a version-specific warning. Match the original step identification, plate shape, hub and attachment details, and obtain Lippert confirmation for your version.
- Why does the manual say the entire step may need replacement? The 2018 owner’s manual, page 11, identifies 164348 at callout F and says the illustrated version is unavailable; if damaged, the entire step assembly must be replaced. The 2023 components diagram, page 3 callout N, repeats the whole-assembly replacement warning. The current sale page does not explain which version its offered plate services. Confirm the repair path with Lippert before ordering.
- Is this the same plate as 301696 or 165983? The parts diagram labels 301696 as the single/double gear plate, 164348 as the triple gear plate and 165983 as the sliding-step gear plate. They are separate part numbers; shared Coach Step branding or a similar photo does not establish interchangeability.
- Is the photo enough to confirm fit? Use the original manufacturer photo as a visual reference, together with the exact assembly identification and the linked components diagram. The diagram distinguishes plate configurations, and the current page gives no bore, tooth-count or mounting-hole measurements. Appearance alone is insufficient.
- Can i replace the plate while the steps remain installed? Lippert TI-145 states that gear-plate or gear-plate-bolt replacement requires removal of the Coach Step assembly from the coach. The procedure addresses threadlocker and a possible tack weld. Have the work assessed and performed by a qualified technician using the manufacturer instructions and the correct assembly version.
- What are the plate dimensions? The focused source does not publish installed plate dimensions, hub bore, tooth count, mounting-hole spacing or torque. The 6.8 x 6.05 x 1.7-inch dimensions and 2.8-pound weight are explicitly shipping-package data.
- Which documents should i check? Review the Coach Step components diagram (CCD-0003507, page 3), the Coach Step owner’s manual (CCD-0001619, pages 5 and 11) and TI-145 (CCD-0002038). Their general service instructions do not override the legacy-version replacement warning.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


