Lippert C01 Power Recliner Control Box HX43T24HR2L-2 - 690453
Ready to order
Lippert C01 Power Recliner Control Box HX43T24HR2L-2 - 690453
---
Lippert C01 Power Recliner Control Box with Light Function
Replace the matching power recliner controller with Lippert 690453, a C01 style control box identified by manufacturer reference HX43T24HR2L-2. Lippert lists a light function and a 10-pin connector, and identifies 376248 as the superseded part number. Check these identifiers against the original assembly before choosing a replacement.
All wires come connected to the control box according to the manufacturer. The original photo shows a black enclosure with attached wiring and several connectors. The listing does not itemize a separate power supply, recliner switch, motor, lighting assembly or installation fasteners as included. Replacing the controller is appropriate only after the original fault and exact part match have been confirmed.
Why Choose This Control Box?
- C01 identification: Match the stated controller style and full reference rather than selecting by appearance alone.
- Light function: Retains the function specifically documented for this replacement.
- Attached wiring: The wires arrive connected to the control box as described by Lippert.
- Replacement traceability: 690453 supersedes 376248 under reference HX43T24HR2L-2.
Technical Specifications
- SKU: 690453
- Brand: Lippert
- Furniture Component Type: Controls
- Warranty Term: 1 Year
- Country of Origin: CHN
- Unit of Measure: EA
- Manufacturer Reference Number: HX43T24HR2L-2
- Supersedes SKU: 376248
- Shipping Dimensions: 6.5" L x 6.5" W x 6" H, 0.92 lbs.
Before You Order
Compare the label, C01 style, complete HX43T24HR2L-2 reference, connector shape and keying, wiring arrangement and required light function with the installed part. The product page does not name exact parent recliner models. No electrical pinout, voltage, current limit, wire length or mounting measurements are supplied. Similar 10-pin controllers may have different functions.
Other Recliner Components
If you are identifying a separate cupholder control, compare the HX43T cupholder 376247 and rail-light cupholder 695074. These links are identification aids; this control box page does not establish that either cupholder is a matched companion or interchangeable component.
Which control box does this replace?
Lippert identifies this as C01 style, manufacturer reference HX43T24HR2L-2, and lists 376248 as the superseded SKU. Match the complete reference and original wiring arrangement before ordering. A matching connector count alone does not confirm compatibility.
Does this control box have a light function?
Yes. The manufacturer explicitly lists a light function. The page does not specify heat, massage or USB functionality for this part; do not transfer those features from other control boxes shown as related products.
Are the wires supplied with the box?
Lippert states that all wires come connected to the control box. The photograph shows the black enclosure with attached wiring and connectors. A separate power supply, switch, motor, lights and installation fasteners are not itemized as included.
Will a 10-pin connection guarantee a fit?
No. The page specifies a 10-pin connector but provides no pinout, electrical ratings or exact seating-model list. Match the original part reference, connector keying, wiring and functions; do not assume every 10-pin recliner controller is interchangeable.
What are the installed dimensions?
The source publishes shipping dimensions of 6.5 x 6.5 x 6 inches and a shipping weight of 0.92 pounds. Those are package fields, not verified enclosure dimensions, mounting-hole spacing or wire lengths.
Is an installation manual available?
The product Support tab points to general Lippert support without an exact manual for this reference. Disconnect power before comparing the original assembly and use the seating manufacturer’s applicable service instructions. No terminal assignments or installation torque values are supplied here.
What warranty and origin are listed?
The manufacturer specification lists a one-year warranty term, country of origin CHN (China), and unit of measure EA. The page does not reproduce the full warranty coverage or an itemized fastener list.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 690453 |
|---|---|
| Brand | Lippert |
| Furniture component type | Controls |
| Warranty term | 1 Year |
| Country of origin | CHN |
| Unit of measure | EA |
| Manufacturer reference number | HX43T24HR2L-2 |
| Supersedes sku | 376248 |
| Shipping dimensions | 6.5" L x 6.5" W x 6" H, 0.92 lbs. |
- Which control box does this replace? Lippert identifies this as C01 style, manufacturer reference HX43T24HR2L-2, and lists 376248 as the superseded SKU. Match the complete reference and original wiring arrangement before ordering. A matching connector count alone does not confirm compatibility.
- Does this control box have a light function? Yes. The manufacturer explicitly lists a light function. The page does not specify heat, massage or USB functionality for this part; do not transfer those features from other control boxes shown as related products.
- Are the wires supplied with the box? Lippert states that all wires come connected to the control box. The photograph shows the black enclosure with attached wiring and connectors. A separate power supply, switch, motor, lights and installation fasteners are not itemized as included.
- Will a 10-pin connection guarantee a fit? No. The page specifies a 10-pin connector but provides no pinout, electrical ratings or exact seating-model list. Match the original part reference, connector keying, wiring and functions; do not assume every 10-pin recliner controller is interchangeable.
- What are the installed dimensions? The source publishes shipping dimensions of 6.5 x 6.5 x 6 inches and a shipping weight of 0.92 pounds. Those are package fields, not verified enclosure dimensions, mounting-hole spacing or wire lengths.
- Is an installation manual available? The product Support tab points to general Lippert support without an exact manual for this reference. Disconnect power before comparing the original assembly and use the seating manufacturer’s applicable service instructions. No terminal assignments or installation torque values are supplied here.
- What warranty and origin are listed? The manufacturer specification lists a one-year warranty term, country of origin CHN (China), and unit of measure EA. The page does not reproduce the full warranty coverage or an itemized fastener list.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


