Lippert ABS Left Brake Assembly, 10 x 2-1/4 in, 4,400 lb - 2025074383
Ready to order
Lippert ABS Left Brake Assembly, 10 x 2-1/4 in, 4,400 lb - 2025074383
---
Left-Hand 10-Inch ABS Replacement Brake for 4,400-lb Axles
Lippert 2025074383 is a 10 x 2-1/4-inch forward self-adjusting electric brake assembly for the driver-side left wheel position on compatible Lippert ABS-equipped 4,400-pound axles. Its four-bolt mounting pattern and ABS configuration must match the original equipment. It helps maintain brake-to-drum clearance during forward stops after initial setup.
One brake assembly is supplied with mounting hardware and adjuster plugs. ABS sensors and shims are not included; the separate air-gap gauge and electric brake controller are also excluded. This service replacement works with an existing Lippert ABS system and is not a complete ABS retrofit kit. A qualified professional should perform installation.
Why Choose This Brake Assembly?
- Left-hand driver-side ABS-compatible electric brake assembly.
- 10 x 2-1/4-inch brake size and four-bolt mounting pattern.
- For matching Lippert ABS-equipped 4,400-pound axles.
- Forward self-adjustment maintains brake-to-drum clearance after initial setup.
- Bonded linings, automotive-grade friction material and e-coated backing plate.
- Mounting hardware and adjuster plugs included; ABS sensors and shims excluded.
- Separate 10-inch brake air-gap gauge required for installation.
Technical Specifications
- SKU: 2025074383
- Brand: Lippert
- Series: ABS
- Brake Type: Forward Self Adjusting Electric, ABS Compatible
- Axle Capacity: 4,400 lbs.
- Brake Size: 10" x 2.25"
- Hardware Type: Brake Assembly
- Side: Driver (Left)
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Retail Box
- Country of Origin: KHM
- UPC: 848150077615
- Shipping Dimensions: 13" L x 11.5" W x 3.5" H, 14.981 lbs.
Before You Order: Confirm Sensor and Shim Requirements
Match the original axle label, left-hand wheel position, 4,400-pound axle application, 10 x 2-1/4-inch brake size, four-bolt mounting geometry and existing ABS configuration. No exact parent axle SKU, mounting-bolt size or bolt-circle dimension is published for this product.
The product page says to reuse existing sensors and shims. The ABS Shims and Sensors manual CCD-0011129, revision July 27, 2026, instead instructs retaining the sensor and fastener while discarding old shims and installing new ones. Have the qualified installer confirm the applicable current Lippert procedure and obtain required shims. Neither sensors nor shims are supplied with this brake assembly.
The ABS service manuals name gauge 2026075853 for 10-inch brakes. Their complete wheel-end diagrams are service context, not a packing list. The manufacturer ABS service manuals below cover both 10-inch and 12-inch brake applications; use the instructions and gauge for this 10-inch assembly.
Which side and axle applications are documented?
SKU 2025074383 is the left-hand driver-side assembly for compatible Lippert ABS-equipped 4,400-pound axles using 10 x 2-1/4-inch brakes and a four-bolt mounting pattern. Match the original equipment label, brake size, mounting geometry and ABS arrangement. Capacity alone does not prove fit.
What comes with this replacement?
The source lists one brake assembly, mounting hardware and adjuster plugs. ABS sensors, sensor shims, air-gap gauge and electric brake controller are not included. A hub/drum, wheel, right-side assembly and complete ABS control system are not supplied as part of this listing.
Can I reuse the ABS sensor and shims?
The product page says existing sensors and shims must be reused. The ABS Shims and Sensors manual CCD-0011129, revision July 27, 2026, instead directs retaining the sensor and fastener but discarding old shims and using new shims. Both sources agree that sensors and shims are excluded from this brake assembly. Have the qualified installer confirm the applicable current Lippert procedure and required shims before installation.
Which air-gap gauge applies to this brake size?
The ABS service manuals identify separate gauge 2026075853 for 10-inch brakes; gauge 2026075854 is for 12-inch brakes. This 10-inch assembly does not include a gauge. Follow the applicable complete manual for sensor air-gap checks at four cardinal positions around the hub.
Does this add ABS to a trailer without ABS?
This assembly replaces a brake that integrates with an existing Lippert ABS sensor and system. It is not a complete retrofit kit. The four-bolt mounting pattern does not establish that an ordinary non-ABS axle becomes ABS-equipped by fitting this assembly.
How does forward self-adjustment work?
Lippert states that the brake self-adjusts during forward stops to maintain brake-to-drum clearance after initial setup. Correct installation, initial adjustment and regular brake inspection remain necessary. An electric brake controller is required; no hydraulic actuator or hydraulic lines are needed.
What material, finish and warranty features are listed?
The manufacturer lists bonded shoe linings, automotive-grade friction material, durable magnets, adjuster plugs and an e-coated backing plate. Lippert states QAI and CSA certification, SAE-N certification and a limited one-year materials/workmanship warranty. Country of Origin is KHM. Full certification scope and warranty terms are not reproduced.
Are the shipping dimensions the brake size?
No. Brake size is 10 x 2.25 inches. Lippert separately publishes a 13 x 11.5 x 3.5-inch shipping package weighing 14.981 pounds. Those package measurements do not establish bolt spacing, wheel-stud size or drum fit.
Who should install this assembly?
The product page calls for installation by a qualified professional. The ABS Brake Repair and ABS Shims and Sensors manuals cover wheel-end service and sensor checks, not just the items in this package. Follow the applicable full procedure and resolve the conflicting shim instructions with Lippert before installation.
Compare a Different Brake Assembly
The standard right-side 4,400-lb brake 2024028247 has a different side and is a different non-ABS listing. Similar dimensions and bolt count do not establish interchangeability. This SKU is one left-side ABS assembly, not a left/right pair.
Manuals and Documents
- ABS Brake Repair Installation Manual - CCD-0011130
- ABS Shims and Sensors Installation Manual - CCD-0011129
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2025074383 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Brake type | Forward Self Adjusting Electric, ABS Compatible |
| Axle capacity | 4,400 lbs. |
| Brake size | 10" x 2.25" |
| Hardware type | Brake Assembly |
| Side | Driver (Left) |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Retail Box |
| Country of origin | KHM |
| Upc | 848150077615 |
| Shipping dimensions | 13" L x 11.5" W x 3.5" H, 14.981 lbs. |
- Which side and axle applications are documented? SKU 2025074383 is the left-hand driver-side assembly for compatible Lippert ABS-equipped 4,400-pound axles using 10 x 2-1/4-inch brakes and a four-bolt mounting pattern. Match the original equipment label, brake size, mounting geometry and ABS arrangement. Capacity alone does not prove fit.
- What comes with this replacement? The source lists one brake assembly, mounting hardware and adjuster plugs. ABS sensors, sensor shims, air-gap gauge and electric brake controller are not included. A hub/drum, wheel, right-side assembly and complete ABS control system are not supplied as part of this listing.
- Can i reuse the abs sensor and shims? The product page says existing sensors and shims must be reused. The ABS Shims and Sensors manual CCD-0011129, revision July 27, 2026, instead directs retaining the sensor and fastener but discarding old shims and using new shims. Both sources agree that sensors and shims are excluded from this brake assembly. Have the qualified installer confirm the applicable current Lippert procedure and required shims before installation.
- Which air-gap gauge applies to this brake size? The ABS service manuals identify separate gauge 2026075853 for 10-inch brakes; gauge 2026075854 is for 12-inch brakes. This 10-inch assembly does not include a gauge. Follow the applicable complete manual for sensor air-gap checks at four cardinal positions around the hub.
- Does this add abs to a trailer without abs? This assembly replaces a brake that integrates with an existing Lippert ABS sensor and system. It is not a complete retrofit kit. The four-bolt mounting pattern does not establish that an ordinary non-ABS axle becomes ABS-equipped by fitting this assembly.
- How does forward self-adjustment work? Lippert states that the brake self-adjusts during forward stops to maintain brake-to-drum clearance after initial setup. Correct installation, initial adjustment and regular brake inspection remain necessary. An electric brake controller is required; no hydraulic actuator or hydraulic lines are needed.
- What material, finish and warranty features are listed? The manufacturer lists bonded shoe linings, automotive-grade friction material, durable magnets, adjuster plugs and an e-coated backing plate. Lippert states QAI and CSA certification, SAE-N certification and a limited one-year materials/workmanship warranty. Country of Origin is KHM. Full certification scope and warranty terms are not reproduced.
- Are the shipping dimensions the brake size? No. Brake size is 10 x 2.25 inches. Lippert separately publishes a 13 x 11.5 x 3.5-inch shipping package weighing 14.981 pounds. Those package measurements do not establish bolt spacing, wheel-stud size or drum fit.
- Who should install this assembly? The product page calls for installation by a qualified professional. The ABS Brake Repair and ABS Shims and Sensors manuals cover wheel-end service and sensor checks, not just the items in this package. Follow the applicable full procedure and resolve the conflicting shim instructions with Lippert before installation.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











