Lippert ABS 4.4K Red 10-Inch Brake Hub with Races and Studs - 2025077657
Ready to order
Lippert ABS 4.4K Red 10-Inch Brake Hub with Races and Studs - 2025077657
---
Lippert ABS 4.4K Red 10-Inch Brake Hub with Races and Studs - 2025077657
Lippert 2025077657 is a red 10-inch ABS brake hub for matching 4,400-lb. trailer axles, with a 6 on 5-1/2-inch bolt pattern and 1/2-inch wheel studs. Its cast-in tone-ring teeth work with the existing sensor in a compatible Lippert ABS electric-brake system.
This service assembly includes the brake hub, pre-installed races and pre-installed zinc-plated wheel studs. It provides the drum surface used by the brake shoes. Bearings, seals, dust cap, spindle hardware, brake assembly and ABS sensor are not itemized as included; this is not the complete installed-bearing kit.
Why Choose This ABS Brake Hub?
- ABS-specific design: Cast-in tone-ring teeth integrate with a compatible existing Lippert ABS sensor and system.
- Match the running gear: For 4,400-lb. axles, 10-inch brakes, 14-15-inch wheels, 6 on 5.5-inch pattern and 1/2-inch studs.
- Pre-installed components: Races and corrosion-resistant zinc-plated wheel studs are already installed.
- Cast-iron construction: The red hub accepts press-in dust caps; a cap is not listed in the supplied contents.
- Explicit system restriction: Compatible with Lippert ABS electric brakes; not compatible with Dexter ABS.
- Manufacturer warranty: Limited one-year warranty for materials or workmanship defects, subject to manufacturer terms.
Technical Specifications
- SKU: 2025077657
- Brand: Lippert
- Series: ABS
- Stud Size: 1/2"
- Brake Type: ABS Compatible
- Lubrication System: Sealed Grease
- Axle Capacity: 4,400 lbs.
- Brake Size: 10"
- Hub Style: Brake Hub
- Hub Bolt Pattern: 6 on 5.5"
- Wheel Size: 14" - 15"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: MYS
- UPC: 848150077714
- Shipping Dimensions: 13" L x 12" W x 6" H, 26.2 lbs.
Before You Order
Use SKU 2025077657 and the original axle and hub identification to verify the spindle, bearing and seal match. Keep the Lippert ABS electric-brake restriction and Dexter ABS exclusion in view. Similar dimensions or a generic universal-fit label do not confirm a match. No superseded part number or additional OEM cross-reference is stated on the focused page.
What comes with this brake hub?
The manufacturer lists a brake hub, races and wheel studs. The races and zinc-plated wheel studs come pre-installed. Quantity in package is one. Bearings, seals, dust cap, cotter pin, spindle nut, washer, brake assembly and ABS sensor are not itemized as included. The shared manual exploded view is general wheel-end identification, not this SKU's packing list.
Which axle and wheel specifications must match?
Match the axle identification and spindle/bearing requirements as well as the published 4,400-lb. axle rating, 10-inch brake size, 6 on 5.5-inch wheel pattern, 1/2-inch studs and 14-15-inch wheel range. Axle capacity is the axle rating, not a rating for one hub. The focused page does not identify an exact parent axle SKU or bearing/seal numbers.
Will it work with Dexter ABS or add ABS to a standard axle?
Lippert explicitly excludes Dexter ABS and specifies Lippert ABS electric brakes. This hub works with an existing compatible Lippert ABS sensor and system. A matching bolt pattern alone does not establish ABS compatibility, and this listing does not establish a standalone ABS retrofit.
Are bearings already installed?
The product is described as a hub with races and wheel studs, both pre-installed. Bearings are not itemized in its included contents. The specification field says Sealed Grease for the lubrication system; that field does not turn this SKU into the separate complete kit with installed bearings.
What do the dimensions and weight describe?
The manufacturer lists a 13 x 12 x 6-inch shipping package weighing 26.2 pounds. These are package values, not installed hub dimensions or net hub weight. The listed 10-inch measurement is brake size; the wheel range is 14-15 inches.
What country of origin is shown?
The manufacturer specification table lists Country of Origin: MYS, while its close-up casting photograph visibly reads CHINA. These source details conflict, so a single verified manufacturing origin cannot be promised from the page. The original images are retained without changing the markings.
Where are the installation instructions?
The product Support link leads to Lippert's Anti-Lock System resources, including ABS Hubs Installation Manual CCD-0011131, revision 07.24.26. It covers removal, brake adjustment, hub replacement and wheel torque. Its drawings are general identification references and do not establish this SKU's exact parent axle or supplied hardware. Use the full manual and the vehicle and wheel manufacturers' requirements.
What should I check before installation?
Confirm the exact replacement and required bearings, seals and hardware before disassembly. Use the full manufacturer instructions for safe frame support, bearing/spindle setup, brake adjustment, fastener sequence and final checks. The manual requires a new cotter pin during replacement and wheel-nut rechecks after 10, 25 and 50 miles; the required parts are not all included in this hub listing.
Manuals and Documents
Lippert ABS Hubs Installation Manual CCD-0011131, Rev. 07.24.26
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2025077657 |
|---|---|
| Brand | Lippert |
| Series | ABS |
| Stud size | 1/2" |
| Brake type | ABS Compatible |
| Lubrication system | Sealed Grease |
| Axle capacity | 4,400 lbs. |
| Brake size | 10" |
| Hub style | Brake Hub |
| Hub bolt pattern | 6 on 5.5" |
| Wheel size | 14" - 15" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | MYS |
| Upc | 848150077714 |
| Shipping dimensions | 13" L x 12" W x 6" H, 26.2 lbs. |
- What comes with this brake hub? The manufacturer lists a brake hub, races and wheel studs. The races and zinc-plated wheel studs come pre-installed. Quantity in package is one. Bearings, seals, dust cap, cotter pin, spindle nut, washer, brake assembly and ABS sensor are not itemized as included. The shared manual exploded view is general wheel-end identification, not this SKU's packing list.
- Which axle and wheel specifications must match? Match the axle identification and spindle/bearing requirements as well as the published 4,400-lb. axle rating, 10-inch brake size, 6 on 5.5-inch wheel pattern, 1/2-inch studs and 14-15-inch wheel range. Axle capacity is the axle rating, not a rating for one hub. The focused page does not identify an exact parent axle SKU or bearing/seal numbers.
- Will it work with dexter abs or add abs to a standard axle? Lippert explicitly excludes Dexter ABS and specifies Lippert ABS electric brakes. This hub works with an existing compatible Lippert ABS sensor and system. A matching bolt pattern alone does not establish ABS compatibility, and this listing does not establish a standalone ABS retrofit.
- Are bearings already installed? The product is described as a hub with races and wheel studs, both pre-installed. Bearings are not itemized in its included contents. The specification field says Sealed Grease for the lubrication system; that field does not turn this SKU into the separate complete kit with installed bearings.
- What do the dimensions and weight describe? The manufacturer lists a 13 x 12 x 6-inch shipping package weighing 26.2 pounds. These are package values, not installed hub dimensions or net hub weight. The listed 10-inch measurement is brake size; the wheel range is 14-15 inches.
- What country of origin is shown? The manufacturer specification table lists Country of Origin: MYS, while its close-up casting photograph visibly reads CHINA. These source details conflict, so a single verified manufacturing origin cannot be promised from the page. The original images are retained without changing the markings.
- Where are the installation instructions? The product Support link leads to Lippert's Anti-Lock System resources, including ABS Hubs Installation Manual CCD-0011131, revision 07.24.26. It covers removal, brake adjustment, hub replacement and wheel torque. Its drawings are general identification references and do not establish this SKU's exact parent axle or supplied hardware. Use the full manual and the vehicle and wheel manufacturers' requirements.
- What should i check before installation? Confirm the exact replacement and required bearings, seals and hardware before disassembly. Use the full manufacturer instructions for safe frame support, bearing/spindle setup, brake adjustment, fastener sequence and final checks. The manual requires a new cotter pin during replacement and wheel-nut rechecks after 10, 25 and 50 miles; the required parts are not all included in this hub listing.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.









