Lippert 8K Grease Disc Hub Rotor, 9/16-Inch Studs - 792676
Ready to order
Lippert 8K Grease Disc Hub Rotor, 9/16-Inch Studs - 792676
---
Lippert 8K Grease Disc Hub Rotor, 9/16-Inch Studs - 792676
Lippert 792676 is one grease-lubricated disc brake hub-rotor assembly for a matching 8,000-pound trailer axle with an 8-on-6.5-inch bolt pattern and 9/16-inch studs. It replaces Lippert 792674.
The manufacturer describes an integral hub-rotor with bearings, races and grease seal; its narrower What's Included section specifically names the inner bearing and seal. Confirm the exact outer-bearing and small-hardware requirements before service. Quantity is one hub-rotor, not both wheel ends or a complete drum-to-disc conversion. A hydraulic brake actuator is required and sold separately; calipers, brackets, lines and controller are not itemized in this package.
Why Choose This Part?
- Exact wheel end: 8,000-pound axle application, 8 on 6.5-inch pattern and 9/16-inch studs.
- Lubrication: Sealed grease system with threaded dust-cap design.
- Construction: Vented cast iron with manufacturer-stated zinc-plated finish.
- Wheel range: Source lists 16-inch through 17-1/2-inch wheels; verify actual clearance.
- Replacement: Supersedes 792674; one hub-rotor per package.
Technical Specifications
- SKU: 792676
- Brand: Lippert
- Weight Capacity: 8,000 lbs.
- Stud Size: 9/16"
- Lubrication System: Sealed Grease
- Axle Capacity: 8,000 lbs.
- Hub Style: Brake Hub
- Hub Bolt Pattern: 8 on 6.5"
- Wheel Size: 16" - 17-1/2"
- Hardware Type: Brake Rotor
- Material Type: Cast Iron
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- Supersedes SKU: 792674
- UPC: 848150069368
- Shipping Dimensions: 16" L x 16" W x 8" H, 40 lbs.
Before You Order
Match the original axle label and wheel-end part numbers, spindle, bearing and seal dimensions, brake interface, wheel clearance and stud size. The generic source statement about competitor axles does not establish fit for an individual axle. No exact parent axle SKU is verified by the focused page. This 9/16-inch stud version is distinct from 5/8-inch 792679; it is not grouped with the oil-bath 10K or 12K rotors. The 8,000-pound rating is the matching axle class, not a capacity increase or the rating of one rotor.
Installation and Reference Notes
The linked nine-page CCD-0011271 manual, revision 08.03.26, is general rotor service guidance. It requires proper frame support, matching replacement parts, correct wheel fasteners and staged wheel torque with rechecks after wheel removal. Its diagrams show a press-in dust cap and six-stud representative assembly; the manual explicitly says other hubs differ. Do not pry or hammer this threaded cap using those representative cap steps. Obtain the matching threaded-cap, spindle-retention and bearing instructions for the installed axle. The torque table distinguishes wheel and fastener configurations and does not give a universal value for every 9/16-inch, 17.5-inch wheel combination. The 16 x 16 x 8-inch box and 40-pound weight are shipping data, not rotor dimensions. The second gallery image is a Lippert axle-parts brand graphic, not additional included hardware.
Related Parts
Browse related RV parts; confirm the individual application before choosing components.
Manuals and Documents
RV Disc Brake Rotor Assemblies Installation Manual - General Aftermarket Guidance
| Sku | 792676 |
|---|---|
| Brand | Lippert |
| Weight capacity | 8,000 lbs. |
| Stud size | 9/16" |
| Lubrication system | Sealed Grease |
| Axle capacity | 8,000 lbs. |
| Hub style | Brake Hub |
| Hub bolt pattern | 8 on 6.5" |
| Wheel size | 16" - 17-1/2" |
| Hardware type | Brake Rotor |
| Material type | Cast Iron |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Supersedes sku | 792674 |
| Upc | 848150069368 |
| Shipping dimensions | 16" L x 16" W x 8" H, 40 lbs. |
- Is this a complete axle conversion kit? No. Quantity is one integral hub-rotor. The hydraulic actuator is separate, and calipers, brackets and brake lines are not itemized.
- Which stud size is supplied? The exact 792676 configuration is 9/16 inch with an 8-on-6.5-inch wheel bolt pattern; do not substitute the 5/8-inch version by title similarity.
- Does this use oil or grease? The exact specifications identify sealed grease lubrication and a threaded dust cap, rather than oil-bath lubrication.
- What does it replace? Lippert lists 792674 as the superseded SKU. Verify original equipment and the complete wheel-end configuration.
- Can the manual cap steps be followed directly? The general manual illustrates a press-in cap. This part is threaded; use matching cap and axle instructions instead of prying or hammering the threaded cap.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.



