Lippert 7K-8K Single-Axle Hardware Service Kit - 232997
Ready to order
Lippert 7K-8K Single-Axle Hardware Service Kit - 232997
---
Lippert Single-Axle Hardware Service Kit for 7K-8K Axles
Lippert 232997 supplies service hardware for a matching standard single-axle assembly in the 7,000- to 8,000-pound range. The exact product page specifies a 3-inch axle beam and 9/16 x 6-5/8-inch U-bolts. Compare the original axle label and hardware before selecting the kit.
The kit brings together the fasteners, seals, spindle hardware and sealed wire connectors shown in the manufacturer photo and identified in TI-180. It is a hardware service kit; a complete axle beam, brake assembly, hub/drum, bearings and tie plates are not itemized in its kit table.
Why Choose This Service Kit?
- Single-axle service kit: for matching standard 7,000- to 8,000-pound axle hardware.
- Documented kit identity: TI-180 identifies 232997 as KIT-AA on page 5.
- U-bolts for 3-inch tube: 9/16-18 UNF x 6.625-inch hardware is specified.
- Service components together: seals, spindle hardware, attachment fasteners and wire connectors are identified in the kit diagram.
- OEM cross-references: Jayco 0265968 and Keystone RV 472928.
- Manufacturer warranty: one-year term listed on the exact product page.
Technical Specifications
- SKU: 232997
- Brand: Lippert
- Weight Capacity: 8,000 lbs.
- Axle Beam Diameter: 3"
- Axle Count: Single
- Hardware Type: Service Kit
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Country of Origin: USA
- Jayco Part Number: 0265968
- Keystone RV Part Number: 472928
- UPC: 848150048912
- Shipping Dimensions: 6.5" L x 6.5" W x 6.5" H, 6 lbs.
- Application: Standard single axle, 7,000 to 8,000 pounds; match original hardware
- U-bolt size: 9/16-18 UNF x 6-5/8 inches, for 3-inch tube
- Service-kit reference: TI-180 / CCD-0002081, page 5, KIT-AA
- Component types: U-bolts, hex nuts, washers, castle nuts, cotter pins, seals, Keps nuts and sealed wire connectors
- Brake or hub assembly: Not listed as included
Kit Components in TI-180
Page 5 of CCD-0002081 identifies KIT-AA as 232997. The table lists the following component identities; it does not state individual packing quantities.
- 179660 (callout AB): Washer, 1.06-inch ID x 2.00-inch OD
- 170997 (callout AC): Washer, 9/16-inch ID x 1-1/2-inch OD
- 122075 (callout AD): Cotter pin, .120-inch x 1-3/4-inch
- 122077 (callout AE): Keps nut, 3/8-24 UNF
- 122088 (callout AF): Seal, 2.25-inch ID x 3.37-inch OD as printed in TI-180
- 122081 (callout AG): Castle nut; verify original spindle thread
- 122084 (callout AH): Sealed wire connector
- 182274 (callout AI): Hex nut, 9/16-18 UNF
- 196351 (callout AJ): U-bolt, 9/16-18 UNF x 6.625 inches, for 3-inch tube
Before You Order
Lippert describes a standard single-axle service kit for 7,000- to 8,000-pound axles. The page specifies a 3-inch beam and 9/16 x 6-5/8-inch U-bolts. Match the axle identification label, original hardware, spindle and brake arrangement; capacity alone does not prove fitment to every axle.
TI-180 distinguishes this standard kit from separate disc-brake service kits 309893 and 313729. Do not choose 232997 solely from a 7K or 8K rating for a different disc/spindle arrangement.
Use the current service instructions for the actual axle, U-bolt type and spring orientation. The linked beam manual has distinct U-bolt torque cases, including a separate overslung/silver-zinc case. This listing does not establish which case applies to your installation.
Have axle and brake service performed with the vehicle properly supported and the correct service procedures. The linked service manual covers lifting precautions, one-time-use cotter pins, seal handling and hub reassembly.
Related Service Component
TI-180 identifies Lippert seal 122088 among this kit's components. Confirm the original seal and hub dimensions if ordering a seal separately.
Manuals and Documents
- TI-180 Axle Beam Replacement Service Kits - CCD-0002081
- Trailer Axle Beam Service Manual - CCD-0001660
TI-180 page 5 identifies this kit. The beam service manual is general procedure guidance; use the instructions applicable to your exact axle configuration.
| Sku | 232997 |
|---|---|
| Brand | Lippert |
| Weight capacity | 8,000 lbs. |
| Axle beam diameter | 3" |
| Axle count | Single |
| Hardware type | Service Kit |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Country of origin | USA |
| Jayco part number | 0265968 |
| Keystone rv part number | 472928 |
| Upc | 848150048912 |
| Shipping dimensions | 6.5" L x 6.5" W x 6.5" H, 6 lbs. |
| Application | Standard single axle, 7,000 to 8,000 pounds; match original hardware |
| U-bolt size | 9/16-18 UNF x 6-5/8 inches, for 3-inch tube |
| Service-kit reference | TI-180 / CCD-0002081, page 5, KIT-AA |
| Component types | U-bolts, hex nuts, washers, castle nuts, cotter pins, seals, Keps nuts and sealed wire connectors |
| Brake or hub assembly | Not listed as included |
- Which axles is this kit intended for? Lippert describes a standard single-axle service kit for 7,000- to 8,000-pound axles. The page specifies a 3-inch beam and 9/16 x 6-5/8-inch U-bolts. Match the axle identification label, original hardware, spindle and brake arrangement; capacity alone does not prove fitment to every axle.
- What does the kit contain? TI-180 page 5, KIT-AA 232997, identifies U-bolts, 9/16-inch hex nuts and washers, larger spindle washers, castle nuts, cotter pins, Keps nuts, seals and sealed wire connectors. The photo shows the grouped hardware. The table does not provide a separate numeric packing quantity for each component.
- Does it include brakes, hubs or bearings? A complete brake assembly, hub/drum, bearing set, axle beam and tie plates are not itemized in the 232997 kit table. This is service hardware, not a complete axle or brake kit.
- What are the u-bolt dimensions? The product page states 9/16 x 6-5/8 inches. TI-180 identifies part 196351 as 9/16-18 UNF x 6.625 inches for a 3-inch tube. Confirm the original U-bolt shape and dimensions; the listed size is not a full dimensional drawing.
- Which seal is listed in the kit? TI-180 page 5 lists seal 122088, described there as 2.25-inch ID x 3.37-inch OD. Confirm the original seal and hub dimensions before replacement. No bearing numbers are supplied by this kit listing.
- Can i use it for a disc-brake conversion? TI-180 distinguishes this standard kit from separate disc-brake service kits 309893 and 313729. Do not choose 232997 solely from a 7K or 8K rating for a different disc/spindle arrangement.
- What torque should i use? Use the current service instructions for the actual axle, U-bolt type and spring orientation. The linked beam manual has distinct U-bolt torque cases, including a separate overslung/silver-zinc case. This listing does not establish which case applies to your installation.
- Are the dimensions the size of the kit components? The 6.5 x 6.5 x 6.5-inch dimensions and 6-pound weight are shipping information. Individual component dimensions are stated separately where Lippert provides them.
- What references should i compare? Lippert SKU 232997, Jayco 0265968 and Keystone RV 472928. Check the original equipment label and hardware rather than assuming every RV of one brand uses this kit.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


