Lippert 5:1 Step Gearbox with Motor and Link A - 676062
Ready to order
Lippert 5:1 Step Gearbox with Motor and Link A - 676062
---
Lippert 5:1 Step Gearbox with Motor and Link A - 676062
Lippert 676062 combines a 5:1 gearbox and motor for Link Assembly A in a replacement RV step drive assembly. The source specifies a 14 NM rating and use with single and double step configurations. Match the installed drive and link assembly before ordering.
The manufacturer lists one assembly with a motor, gearbox and three bolts. The gallery shows the curved linkage arm and mounting plate with the drive. A complete step, controller, door switch and wiring harness are not itemized as included; the assembly is a service part for a matching step system.
Why Choose This Part?
- 5:1: gearbox and motor assembly for the specified Link A application.
- 14: NM rating published by Lippert.
- Source: describes single and double step configurations.
- Motor,: gearbox and three bolts itemized by the manufacturer.
- Supersedes: Lippert SKU 676506.
Technical Specifications
- SKU: 676062
- Brand: Lippert
- Gear Linkage Type: IMGL A
- Country of Origin: USA
- Quantity In Package: 1
- Warranty Term: 1 Year
- Unit of Measure: EA
- Supersedes SKU: 676506
- Reference Vendor/Manufacturer Name: Lippert
- UPC: 848150061850
- Shipping Dimensions: 12" L x 8.5" W x 8.5" H, 7.18 lbs.
- Gear Ratio: 5:1
- Rating: 14 NM
- Step Configuration: Single and double
- Manufacturer Listed Contents: Motor; Gearbox; Bolt (3)
Before You Order
The source identifies Gear Linkage Type IMGL A and says to consult the owner’s manual for the correct link assembly. It does not name exact compatible step series, parent part numbers or RV models. Compare the original part number, linkage geometry, mounting pattern and connector against the installed system documentation. A shared 5:1 ratio or similar curved arm does not establish interchangeability with a high-torque A, B or C assembly.
Installation and Service
Follow the installed step system’s service instructions and isolate its electrical power before working near moving linkage. The product page supplies no exact installation PDF, mounting torque, wiring pinout or adjustment sequence. Confirm those details in the correct system manual rather than deriving them from the photos.
Dimensions
Published Shipping Dimensions are 12 x 8.5 x 8.5 inches and 7.18 pounds. These describe the shipping reference, not a dimensioned installed assembly or a verified linkage travel measurement. Confirm available clearance and mounting geometry against the original unit.
Related Step Parts
Compare the high-torque Link A assembly 366043 and high-torque Link B assembly 369545 only against the required system part number. These are separate alternatives to research, with no substitution or shared fitment claimed.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 676062 |
|---|---|
| Brand | Lippert |
| Gear linkage type | IMGL A |
| Country of origin | USA |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Unit of measure | EA |
| Supersedes sku | 676506 |
| Reference vendor/manufacturer name | Lippert |
| Upc | 848150061850 |
| Shipping dimensions | 12" L x 8.5" W x 8.5" H, 7.18 lbs. |
| Gear ratio | 5:1 |
| Rating | 14 NM |
| Step configuration | Single and double |
| Manufacturer listed contents | Motor; Gearbox; Bolt (3) |
- What is included? The manufacturer lists one assembly with a motor, gearbox and three bolts. The gallery shows the curved linkage arm and mounting plate with the drive. A complete step, controller, door switch and wiring harness are not itemized as included; the assembly is a service part for a matching step system.
- Will it fit my step? The source identifies Gear Linkage Type IMGL A and says to consult the owner’s manual for the correct link assembly. It does not name exact compatible step series, parent part numbers or RV models. Compare the original part number, linkage geometry, mounting pattern and connector against the installed system documentation. A shared 5:1 ratio or similar curved arm does not establish interchangeability with a high-torque A, B or C assembly.
- What does it replace? Lippert lists 676506 as the superseded SKU. Match the installed system documentation before replacement.
- Is an installation manual supplied? Follow the installed step system’s service instructions and isolate its electrical power before working near moving linkage. The product page supplies no exact installation PDF, mounting torque, wiring pinout or adjustment sequence. Confirm those details in the correct system manual rather than deriving them from the photos.
- Are these installed dimensions? Published Shipping Dimensions are 12 x 8.5 x 8.5 inches and 7.18 pounds. These describe the shipping reference, not a dimensioned installed assembly or a verified linkage travel measurement. Confirm available clearance and mounting geometry against the original unit.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.




