Lippert 4,400-lb Idler Hub with Uninstalled Bearing Kit, 6 on 5.5 - 144604

SKU: 144604
Added to catalog: November 18, 2026

Sale price$59.99
| Found it cheaper? Get an answer in seconds.
Available from Lippert
Availability details
Elkhart RV Parts warehouse0 ready to ship
Lippert warehouseAvailable
Ships after Lippert warehouse processing. See the delivery estimate below for the current expected window.
Delivery Estimate around November 25–27
1-Hour Cancellation Window

1-Hour Cancellation Window

You'll have 1 hour after placing your order to update your shipping address or cancel completely.

After that, we begin coordinating with our vendors to fulfill your order — at that point, cancellations and address changes usually aren't possible.

If you're unsure about anything, please reach out before ordering or cancel within the window.

Earn $1.19 in store creditAdded to your account when your order is delivered. Good for 90 days; sign in at checkout to use it.
Saved items

How it works · terms

As used by RV pros

Mobile RV techs and dealers who buy their parts here. Tap one to see their Google profile.

Verify the Spindle, Bearings and Six-Stud Wheel Pattern
Lippert 144604 is an idler hub supplied with a bearing kit that the manufacturer identifies as not installed. It is specified for matching 4,400-pound trailer idler-axle applications with a 6 on 5-1/2-inch bolt pattern, 1/2-inch studs and 14- to 15-inch wheels.
---
ElkhartRVParts.com - The Only Authorized Place for Lippert RV Parts
100% Verified Authentic OEM Grade Part

Lippert 4,400-Pound Idler Hub with Uninstalled Bearing Kit

Lippert 144604 is an idler hub supplied with a bearing kit that the manufacturer identifies as not installed. It is specified for matching 4,400-pound trailer idler-axle applications with a 6 on 5-1/2-inch bolt pattern, 1/2-inch studs and 14- to 15-inch wheels.

The itemized package lists an idler hub and bearing kit, quantity one. This is a non-braking hub, not a brake drum or complete axle. The gallery shows an assembled, greased example, but the exact title and features describe the bearing kit as uninstalled; do not assume it arrives packed, adjusted or ready to mount without service preparation.

Why Choose This Idler Hub?

  • 4,400-pound axle application: Use with the correct spindle and bearing requirements, not capacity alone.
  • Six-stud pattern: 6 on 5.5-inch wheel pattern, 1/2-inch studs and published 1.25-inch stud length.
  • Uninstalled bearing kit: Manufacturer identifies installation work as required for the supplied bearing kit.
  • Idler design: For non-braking trailer axles; not a brake-hub conversion.
  • Cast-iron construction: Source lists cast iron with zinc-plated wheel studs.
  • Cross-reference: Manufacturer publishes Dexter-compatible number K08-250-91.
  • Press-in cap interface: Accepts press-in dust caps; exact cap size and inclusion are not stated.

Technical Specifications

  • SKU: 144604
  • Brand: Lippert
  • Stud Size: 1/2"
  • Stud Length: 1.25"
  • Axle Capacity: 4,400 lbs.
  • Hub Style: Idler Hub
  • Hub Bolt Pattern: 6 on 5.5"
  • Wheel Size: 14" - 15"
  • Hardware Type: Hub
  • Material Type: Cast Iron
  • Unit of Measure: EA
  • Item Weight (Pounds): 10.201
  • Warranty Term: 1 Year
  • Quantity In Package: 1
  • Package Type: Kraft Box
  • Country of Origin: USA
  • Manufacturer Reference Number: 144604
  • Dexter Compatible Part Number: K08-250-91
  • UPC: 848150068309
  • Shipping Dimensions: 8" L x 8" W x 4.5" H, 11 lbs.
  • Bearing kit installation: Not installed
  • Fitment limitation: Matching Lippert brand idler axles only; verify spindle, bearings and seals
  • Dust cap interface: Press-in; cap size and inclusion not established

Before You Order

Confirm bolt pattern, axle rating, original bearing numbers, seal dimensions and spindle fit. The manufacturer identifies an uninstalled bearing kit despite the assembled example photos. Dexter K08-250-91 is the published compatible-part reference; no superseded SKU or exact parent axle model is named on the focused source.

Are the bearings already installed and greased?

The exact product title and features say Bearing Kit (Not Installed). The source gallery nevertheless depicts bearings, a seal and red grease in an assembled hub. Treat those photos as illustrative rather than a promise of preinstallation or grease preparation. Confirm actual supplied components and perform the required installation and adjustment.

What comes in the package?

The itemized source lists one idler hub and bearing kit. It does not enumerate exact bearing numbers, seal part numbers, dust cap, cotter pin, spindle nut, spindle washer or lug nuts as included. The general manual’s exploded view is not a packing list for this SKU.

Will it fit any 4,400-pound axle?

No universal spindle match is established. Verify axle identification, inner and outer bearing numbers, seal dimensions, spindle dimensions, bolt pattern and wheel requirements. The manufacturer lists Dexter-compatible reference K08-250-91, but the capacity or reference alone does not replace checking the complete configuration.

Can this be used with trailer brakes?

The exact source says this idler hub does not allow for a trailer braking system. It is not a brake drum and should not be selected as a replacement brake hub.

What wheel and stud configuration is listed?

The source specifies 14- to 15-inch wheels, six studs on a 5.5-inch bolt circle, 1/2-inch stud size and 1.25-inch stud length. Confirm the wheel mounting face and fastener requirements against the original equipment. Thread pitch is not explicitly listed.

Which bearing and seal numbers are supplied?

The focused product page does not publish a complete bearing, race and seal part-number list. Photo markings are not treated as a guaranteed bill of materials. Match the original equipment and exact supplied kit before installation.

Do the manuals establish exact axle fitment or package contents?

No. CCD-0011133 and CCD-0011255 provide general hub and bearing service guidance without identifying SKU 144604 or an exact parent axle. The hub exploded view states that configurations can differ. The bearing manual calls bearing-cup replacement a precise procedure requiring correct seating and recommends a certified service center.

What should I know before servicing it?

Follow the complete linked manuals and your exact axle instructions. Support the RV as specified, keep bearing cones and cups matched, use the required lubrication and adjustment sequence, and verify wheel torque. A seating-torque step is not a final spindle-nut setting; do not extract one torque number from the full procedure.

Are the published dimensions the hub dimensions?

The 8 x 8 x 4.5-inch dimensions and 11-pound weight are shipping-package information. Hub offset, seal bore, spindle bore, dust-cap diameter and installed hub dimensions are not specified on the focused page.

Compare Other Configurations

The 7,000-pound idler hub 141291 with an 8 on 6.5-inch pattern is a different axle and wheel configuration. Compare specifications carefully; it is not established as an interchangeable substitute for this 4,400-pound hub.

Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

Published Item and Shipping Weight

Lippert lists an item weight of 10.201 pounds separately from the 11-pound shipping package. The shipping box measures 8 x 8 x 4.5 inches; these are not installed hub dimensions. The exact product page restricts application to matching Lippert-brand axles. The Dexter-compatible K08-250-91 reference does not establish universal Dexter axle fitment.

Manuals and Documents

Loading customer reviews…

Read reviews of our store

ElkhartRVParts trusted by PROs and DIYs
100% Authentic OEM Parts

Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.

You may also like

Recently viewed