Lippert 3,500-lb Slipper Spring, 5 Leaves, 2 in Wide, E5226 - 342781
---
Five-Leaf Slipper Spring E5226
Lippert 342781 is one steel slipper leaf spring with five leaves, a 3,500-pound spring assembly capacity and a nominal 2-inch width. Lippert lists a 26-1/2-inch length and the identification references Standens E5226 and Dexter E-5226.
The layered spring flexes to absorb road shock and vibration in a compatible trailer suspension. Its single-eye layout has a bushing at one end and a slipper end at the other. Pre-mounted hangers are required; hanger kits are sold separately. Match the original suspension geometry and rating before ordering.
Why Choose This Part?
- Spring rating: 3,500-pound capacity applies to this spring assembly.
- Five steel leaves: Layered construction flexes as the suspension moves.
- Single-eye slipper design: Pre-installed bushing at the eye; confirm the matching hanger arrangement.
- Identification: Standens E5226 and Dexter compatible part number E-5226.
- Nominal dimensions: 26-1/2-inch listed length and 2-inch width.
- One spring: Hanger kits are sold separately; this is not a complete axle assembly.
Technical Specifications
- SKU: 342781
- Brand: Lippert
- Weight Capacity: 3,500 lbs.
- Standens Leaf Spring Number: E5226
- Spring Layer Count: 5
- Eye To Eye Length: 26.5
- Axle Spring Type: Slipper Leaf
- Load Arch Length: 2.5
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 26.5
- Item Width (Inches): 2
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- Dexter Compatible Part Number: E-5226
- UPC: 848150067142
- Shipping Dimensions: 27.5" L x 4" W x 3.25" H, 26.72 lbs.
Before You Order
Check the original equipment label and spring reference. Compare the eye, slipper end, spring width, hanger geometry, length measurement and capacity. This page does not establish a specific parent axle or universal fitment. Inspect and maintain the suspension according to its service instructions.
What is included with spring 342781?
One five-leaf slipper spring. Lippert states that bushings are pre-installed into the eye-holes. Hanger kits are sold separately. An axle, equalizer, U-bolts and a complete installation hardware kit are not listed as included.
Is 3,500 pounds the axle or trailer rating?
It is the capacity of this spring assembly. It does not increase the rating of the axle, frame, tires or trailer. Use the original equipment ratings and the correct suspension configuration.
Which replacement references are published?
Lippert lists Standens E5226 and Dexter compatible part number E-5226. Compare the complete identification, spring shape, mounting geometry, dimensions and load requirements; a matching capacity alone does not confirm fit.
How is the spring length described?
Lippert titles this single-eye slipper spring as 26-1/2 inches long eye-to-eye and repeats 26.5 in the Eye To Eye Length and Item Length fields. The page does not define measurement endpoints or state a loaded or unloaded condition for that length. Verify the measurement method against the original spring before ordering.
Does it fit every Lippert or competitor axle?
The manufacturer describes broad use with Lippert and competitor trailer axles, but the exact product page does not identify specific axle or trailer models. Confirm the single-eye slipper arrangement, length measurement, width, eye and bushing dimensions, hanger compatibility and required capacity.
Are the shipping dimensions the installed dimensions?
No. Lippert lists a 27.5 x 4 x 3.25-inch shipping package weighing 26.72 pounds. The item fields separately list 26.5-inch length and 2-inch width. The Load Arch Length field is 2.5; do not substitute package measurements for spring geometry.
Which installation instructions should I use?
The RV Leaf Springs and Bushings aftermarket manual covers slipper and double-eye configurations. Follow the instructions for the actual suspension and fasteners. A single torque value is not appropriate for every configuration; support the trailer correctly and obtain qualified service assistance when needed.
Manuals and Documents
RV Leaf Springs (Slipper and Double-Eye) and Bushings Aftermarket Manual
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 342781 |
|---|---|
| Brand | Lippert |
| Weight capacity | 3,500 lbs. |
| Standens leaf spring number | E5226 |
| Spring layer count | 5 |
| Eye to eye length | 26.5 |
| Axle spring type | Slipper Leaf |
| Load arch length | 2.5 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 26.5 |
| Item width (inches) | 2 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Dexter compatible part number | E-5226 |
| Upc | 848150067142 |
| Shipping dimensions | 27.5" L x 4" W x 3.25" H, 26.72 lbs. |
- What is included with spring 342781? One five-leaf slipper spring. Lippert states that bushings are pre-installed into the eye-holes. Hanger kits are sold separately. An axle, equalizer, U-bolts and a complete installation hardware kit are not listed as included.
- Is 3,500 pounds the axle or trailer rating? It is the capacity of this spring assembly. It does not increase the rating of the axle, frame, tires or trailer. Use the original equipment ratings and the correct suspension configuration.
- Which replacement references are published? Lippert lists Standens E5226 and Dexter compatible part number E-5226. Compare the complete identification, spring shape, mounting geometry, dimensions and load requirements; a matching capacity alone does not confirm fit.
- How is the spring length described? Lippert titles this single-eye slipper spring as 26-1/2 inches long eye-to-eye and repeats 26.5 in the Eye To Eye Length and Item Length fields. The page does not define measurement endpoints or state a loaded or unloaded condition for that length. Verify the measurement method against the original spring before ordering.
- Does it fit every lippert or competitor axle? The manufacturer describes broad use with Lippert and competitor trailer axles, but the exact product page does not identify specific axle or trailer models. Confirm the single-eye slipper arrangement, length measurement, width, eye and bushing dimensions, hanger compatibility and required capacity.
- Are the shipping dimensions the installed dimensions? No. Lippert lists a 27.5 x 4 x 3.25-inch shipping package weighing 26.72 pounds. The item fields separately list 26.5-inch length and 2-inch width. The Load Arch Length field is 2.5; do not substitute package measurements for spring geometry.
- Which installation instructions should i use? The RV Leaf Springs and Bushings aftermarket manual covers slipper and double-eye configurations. Follow the instructions for the actual suspension and fasteners. A single torque value is not appropriate for every configuration; support the trailer correctly and obtain qualified service assistance when needed.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.





