Lippert 3,500-lb Idler Hub, 5 on 5, Uninstalled Bearing Kit - 141287
Ready to order
Lippert 3,500-lb Idler Hub, 5 on 5, Uninstalled Bearing Kit - 141287
---
Lippert 3,500-lb. Idler Hub and Uninstalled Bearing Kit 141287
Replace a matching non-braking trailer wheel hub with Lippert 141287. This cast-iron idler hub is specified for 3,500-pound axles, a 5-on-5-inch wheel bolt pattern, 1/2-inch studs and 13-to-15-inch wheels. Lippert lists Dexter-compatible cross-reference K08-256-91.
The source lists one idler hub and a bearing kit, with the bearing kit not installed. The manufacturer photos show bearings and grease in a hub, but they do not change the stated delivery configuration. Do not assume a ready-to-install, prepacked assembly or an itemized supply of additional wheel-end hardware.
Why Choose This Idler Hub?
- 3,500-pound axle application: Made for matching trailer idler axles with 5-on-5-inch wheels.
- Bearing kit supplied separately: Manufacturer delivery configuration is bearing kit not installed; assembly and preparation are required.
- Cast-iron hub: Zinc-plated wheel studs provide corrosion resistance.
- Defined wheel interface: 1/2-inch studs, 1.25-inch stud length and 13-to-15-inch wheel application.
- Press-in dust-cap design: Accepts press-in caps; exact cap diameter and extra hardware contents are not itemized.
Technical Specifications
- SKU: 141287
- Brand: Lippert
- Stud Size: 1/2"
- Stud Length: 1.25"
- Axle Capacity: 3,500 lbs.
- Hub Style: Idler Hub
- Hub Bolt Pattern: 5 on 5"
- Wheel Size: 13" - 15"
- Hardware Type: Hub
- Material Type: Cast Iron
- Unit of Measure: EA
- Item Weight (Pounds): 7.850
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: USA
- Manufacturer Reference Number: 141287
- Dexter Compatible Part Number: K08-256-91
- UPC: 848150068279
- Shipping Dimensions: 6.75" L x 6.75" W x 4.5" H, 6 lbs.
Before You Order
Confirm the axle identification, bearing numbers, spindle journals, wheel bolt pattern and other dimensions against the original assembly. This is an idler hub for a non-braking wheel end; it does not provide a trailer braking system. The axle-capacity figure does not establish a universal fit or a new rating for the trailer.
The source does not provide exact bearing cone and cup part numbers, seal dimensions, hub offset, cap-bore diameter or a complete individual hardware inventory. The general manual’s exploded view is explicitly for identification only. Do not infer the kit contents or exact bearing specification from the source photographs.
Choose the Correct Bolt Pattern
For comparison, Lippert 814208 is the 3,500-pound idler-hub option with an uninstalled bearing kit and a 5-on-4-1/2-inch pattern. This listing, 141287, uses 5 on 5 inches. These different bolt patterns are not interchangeable.
Measurements and Service Guidance
Lippert lists item weight as 7.850 pounds and separately publishes shipping dimensions of 6.75 x 6.75 x 4.5 inches at 6 pounds. Those source weight entries differ. Shipping data does not establish installed hub width, spindle fit or bearing dimensions.
The linked general manuals explain hub service, bearing preparation and wheel fastening. Neither identifies 141287 by part number. Keep spindle-nut bearing adjustment separate from wheel lug-nut torque, and follow the complete applicable instructions. The idler-hub wheel chart has 14- and 15-inch rows for 1/2-inch studs but no 13-inch row; do not extrapolate a missing torque value. Properly support the RV according to the manufacturer’s requirements before wheel-end service.
Manuals and Documents
- Idler Hub Assemblies Installation and Owner’s Manual - general reference
- RV Bearing Kits / Grease and Oil Seals Manual - general reference
Frequently Asked Questions
Does 141287 work with trailer brakes?
No. Lippert identifies this as an idler hub and states it does not allow for a trailer braking system. It is not a brake drum or disc brake conversion kit.
Are the bearings already installed?
The manufacturer title and description specify a bearing kit that is not installed. The source photos show a hub with bearings and grease, so they should not be used as a promise of preinstalled or prepacked delivery. Confirm the received components and complete the required preparation before service.
What is included?
Lippert lists one idler hub and a bearing kit. The page does not separately itemize bearing cone and cup numbers, seal size, dust cap, cotter pin, spindle nut, washer or lug-nut quantities. The general manual exploded view is for identification and is not this SKU’s packing list.
How do I confirm this hub fits?
Match the axle identification and 3,500-pound axle application, 5-on-5-inch wheel bolt pattern, 1/2-inch studs, bearing numbers, spindle journals and other dimensions before purchase. The source lists Dexter-compatible reference K08-256-91. Capacity and wheel pattern alone do not prove every spindle or wheel-end detail.
Is this interchangeable with 814208?
No. Both are 3,500-pound idler hubs with an uninstalled bearing kit, but 141287 uses a 5-on-5-inch wheel bolt pattern and 814208 uses 5-on-4-1/2 inches. Choose the pattern that matches the wheel and confirm the remaining fit details.
What do the listed weights mean?
Lippert separately lists Item Weight 7.850 pounds and shipping data of 6.75 x 6.75 x 4.5 inches at 6 pounds. These are inconsistent weight entries, preserved as labeled source data. The shipping measurements are not installed hub, bearing bore or spindle measurements.
Where are the installation and torque instructions?
The linked general idler-hub manual covers spindle-nut adjustment and staged wheel torque. Spindle bearing adjustment and wheel lug-nut torque are different procedures. Its chart includes 14- and 15-inch wheels with 1/2-inch studs but does not supply a 13-inch row. Follow the full applicable hub, wheel and axle instructions; do not invent a 13-inch value or apply an initial spindle seating torque as the final setting.
| Sku | 141287 |
|---|---|
| Brand | Lippert |
| Stud size | 1/2" |
| Stud length | 1.25" |
| Axle capacity | 3,500 lbs. |
| Hub style | Idler Hub |
| Hub bolt pattern | 5 on 5" |
| Wheel size | 13" - 15" |
| Hardware type | Hub |
| Material type | Cast Iron |
| Unit of measure | EA |
| Item weight (pounds) | 7.850 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | USA |
| Manufacturer reference number | 141287 |
| Dexter compatible part number | K08-256-91 |
| Upc | 848150068279 |
| Shipping dimensions | 6.75" L x 6.75" W x 4.5" H, 6 lbs. |
- Does 141287 work with trailer brakes? No. Lippert identifies this as an idler hub and states it does not allow for a trailer braking system. It is not a brake drum or disc brake conversion kit.
- Are the bearings already installed? The manufacturer title and description specify a bearing kit that is not installed. The source photos show a hub with bearings and grease, so they should not be used as a promise of preinstalled or prepacked delivery. Confirm the received components and complete the required preparation before service.
- What is included? Lippert lists one idler hub and a bearing kit. The page does not separately itemize bearing cone and cup numbers, seal size, dust cap, cotter pin, spindle nut, washer or lug-nut quantities. The general manual exploded view is for identification and is not this SKU’s packing list.
- How do i confirm this hub fits? Match the axle identification and 3,500-pound axle application, 5-on-5-inch wheel bolt pattern, 1/2-inch studs, bearing numbers, spindle journals and other dimensions before purchase. The source lists Dexter-compatible reference K08-256-91. Capacity and wheel pattern alone do not prove every spindle or wheel-end detail.
- Is this interchangeable with 814208? No. Both are 3,500-pound idler hubs with an uninstalled bearing kit, but 141287 uses a 5-on-5-inch wheel bolt pattern and 814208 uses 5-on-4-1/2 inches. Choose the pattern that matches the wheel and confirm the remaining fit details.
- What do the listed weights mean? Lippert separately lists Item Weight 7.850 pounds and shipping data of 6.75 x 6.75 x 4.5 inches at 6 pounds. These are inconsistent weight entries, preserved as labeled source data. The shipping measurements are not installed hub, bearing bore or spindle measurements.
- Where are the installation and torque instructions? The linked general idler-hub manual covers spindle-nut adjustment and staged wheel torque. Spindle bearing adjustment and wheel lug-nut torque are different procedures. Its chart includes 14- and 15-inch wheels with 1/2-inch studs but does not supply a 13-inch row. Follow the full applicable hub, wheel and axle instructions; do not invent a 13-inch value or apply an initial spindle seating torque as the final setting.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.







