Lippert 29.5-Inch Inside-Mount Landing Gear Lead Leg - 119102
Ready to order
Lippert 29.5-Inch Inside-Mount Landing Gear Lead Leg - 119102
---
Lippert 29.5-Inch Inside-Mount Landing Gear Lead Leg - 119102
Lippert 119102 is the standard-length, inside-frame-mount lead leg for a correctly matched Venture-style power landing-gear assembly. Its 29.5-inch measurement is the length of the outer black tube, not travel, maximum extended height or the shipping carton. The lead/drive leg is the system side where the motor and gearbox attach.
One replacement lead leg is listed. The current exact page explicitly sells the pin, foot pad and mounting hardware separately. A motor, gearbox, cross shaft, switch, harness and second leg are not itemized as included. This is not an assembled two-leg power landing-gear system.
Why Choose This Part?
- Configuration: Lead / motor-drive leg for a matched Venture-style system.
- Mount: Inside-frame configuration confirmed by exact page and TI-155.
- Size: Standard 29.5-inch outer black tube.
- Cap: Press-fit identification confirmed by exact TI-155 column.
- Package scope: One leg; pin, foot pad and mounting hardware separate.
Technical Specifications
- SKU: 119102
- Brand: Lippert
- Jack Mounting Location: Inside Mount
- Jack Type: Landing Gear
- Warranty Term: 1 Year
- Quantity In Package: 1
- Product Length: 29.5" (Standard)
- Country of Origin: CHN
- Unit of Measure: EA
- Heartland Part Number: 15138
- Keystone RV Part Number: 417107
- Winnebago Part Number: 203088-01-000
- UPC: 848150065940
- Shipping Dimensions: 39" L x 8" W x 4" H, 28 lbs.
Before You Order
TI-155 / CCD-0002050 identifies 119102 by four attributes: 29.5-inch outer black tube, motor/drive configuration, inside-frame mounting and press-fit cap. The exact page calls it the standard lead leg for Venture-style power landing gear. Match all four attributes, original part number, mounting tabs and mating gearbox. Lead means drive side, where the motor attaches; it does not mean a universal driver/passenger vehicle position. Heartland 15138, Keystone 417107 and Winnebago 203088-01-000 are part cross-references, not fit to every RV of those brands.
Installation and Reference Notes
The older electric landing-gear component chart describes 119102 with a snapper pin at callout B, but the current sales page explicitly says pin, foot pad and mounting hardware are sold separately. Do not treat the older component line as a current accessory promise. The assembly guide shows a complete system layout rather than this SKU's package inventory. No numerical load rating or jack travel is published on the focused page; a generic 6K manual in the support collection does not establish this exact leg's rating. Use the matched installation/service procedure and prescribed vehicle supports. The manufacturer support guidance says the assembly alone is not intended for tire changes or vehicle servicing. Do not substitute 33.5-inch, outside-mount, extra-tab or follow/idler versions on appearance alone.
Published shipping reference: 39" L x 8" W x 4" H, 28 lbs. These are transport data, not installed dimensions.
Related Parts
Browse related parts. Verify dimensions and application separately before selecting another item.
Other lead-leg options: 33.5-inch inside-mount lead leg 126386 and 33.5-inch outside-mount lead leg 177202. Match the required mounting and tube length before choosing.
Manuals and Documents
| Sku | 119102 |
|---|---|
| Brand | Lippert |
| Jack mounting location | Inside Mount |
| Jack type | Landing Gear |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Product length | 29.5" (Standard) |
| Country of origin | CHN |
| Unit of measure | EA |
| Heartland part number | 15138 |
| Keystone rv part number | 417107 |
| Winnebago part number | 203088-01-000 |
| Upc | 848150065940 |
| Shipping dimensions | 39" L x 8" W x 4" H, 28 lbs. |
- What does 29.5 inches measure? The outer black tube, not travel, overall extended height or carton length.
- Which leg and mount is this? Lead / motor-drive configuration, inside-frame mounting and press-fit cap per exact TI-155 column. Match all four identification attributes.
- Does it include the pin, footpad or mounting hardware? The current page sells all three separately. The older chart says with snapper pin; that historical line is not a current package promise.
- Does a motor or second leg come with it? Neither a motor, gearbox, cross shaft, harness, switch nor a second leg is itemized as included. One replacement leg is listed.
- Can i substitute the 33.5-inch or outside-mount version? Not without verifying the complete original application. Tube length, frame mounting, drive/idler role and cap style are separate selection attributes.
- Is the numerical capacity or travel established? No exact load rating or stroke is published on the focused sales page. Do not infer one from a generic family manual or shipping size.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.


