Lippert 2,200-lb Four-Leaf Double-Eye Spring 72-78 - 129745
Ready to order
Lippert 2,200-lb Four-Leaf Double-Eye Spring 72-78 - 129745
---
Lippert 2,200-lb Double-Eye Leaf Spring 129745 / 72-78
Replace a correctly matched trailer suspension spring with this four-leaf steel Lippert spring. Its flexible leaf stack helps absorb road shock and vibration, reducing strain on the trailer. Lippert specifies a 2,200-pound spring assembly capacity, 1-3/4-inch nominal width and 25-1/4-inch eye-to-eye length when unloaded.
The package contains one spring with pre-installed nylon bushings. Pre-mounted hangers are required; hanger kits and bronze bushings are sold separately. A complete axle, suspension kit, wheels and separate mounting hardware are not documented as included. The trailer-wheel photo is representative.
Why Choose This Lippert Spring?
- Four-leaf steel construction: Flexes to help absorb road shock and vibration.
- 2,200-pound spring rating: Capacity for the spring assembly, not the complete trailer.
- Double-eye design: 25.25-inch unloaded eye-to-eye length and 1.75-inch nominal width.
- Nylon bushings included: Bronze bushings and hanger kits sold separately.
- Published identification: Standens 72-78, Dexter 072-078-00, Jayco 0227024 and Keystone 439411.
- One spring per package: Kraft box and one-year manufacturer warranty term.
Technical Specifications
- SKU: 129745
- Brand: Lippert
- Weight Capacity: 2,200 lbs.
- Standens Leaf Spring Number: 72-78
- Load Length: 26"
- Spring Layer Count: 4
- Eye To Eye Length: 25.25
- Axle Spring Type: Double-Eye Leaf
- Load Arch Length: 2
- Axle Type: Spring
- Hardware Type: Spring
- Unit of Measure: EA
- Item Length (Inches): 25.25
- Item Width (Inches): 1.75
- Item Weight (Pounds): 13.900
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Kraft Box
- Country of Origin: CHN
- Manufacturer Reference Number: 129745
- Reference Vendor/Manufacturer Name: Lippert
- Dexter Compatible Part Number: 072-078-00
- Jayco Part Number: 0227024
- Keystone RV Part Number: 439411
- UPC: 848150010438
- Shipping Dimensions: 27.5" L x 7" W x 3" H, 14.5 lbs.
- Approximate drawing - loaded length: 26 inches
- Approximate drawing - loaded arch: 3.125 inches; differs from Load Arch Length table field 2
- Approximate drawing - width range: 1.72 to 1.79 inches
- Approximate drawing - eye opening callout: 0.573 to 0.603 inches; verify installed bushing and hardware
Before You Order
Check the original equipment label and match the spring assembly rating, unloaded eye-to-eye length, width, arch, eye/bushing dimensions and mounting arrangement. Lippert lists Standens 72-78, Dexter compatible 072-078-00, Jayco 0227024 and Keystone 439411. Brand or cross-reference alone does not establish fitment to every axle or RV.
The approximate drawing labels a 26-inch loaded length and 3.125-inch loaded arch. The specification table separately lists Load Arch Length as 2 without an explicit unit. These arch values are not reconciled by Lippert on the page; confirm the required measurement rather than assuming they agree. The 25.25-inch eye-to-eye measurement is unloaded.
Installation Reference
RV Leaf Springs and Bushings Installation Manual CCD-0011277 provides general double-eye replacement guidance on pages 3-5 and safety information on page 2. It does not name this SKU or an exact parent axle. The manual requires appropriate support and new U-bolts and nuts; use its hardware- and axle-specific torque guidance for the actual assembly.
Compare a Different Spring Rating
The 2,600-pound spring 702095 / 72-97 is a different-rated part. Shared dimensions do not establish interchangeability; use the original equipment specification.
Frequently Asked Questions
Is 2,200 pounds the axle capacity?
Lippert states a 2,200-pound spring assembly capacity. This is not a rating for a complete axle, trailer or suspension. Match the original equipment requirements and ratings.
Is the spring 25.25 or 26 inches long?
The title and Eye To Eye Length field specify 25.25 inches unloaded. The Load Length field is 26 inches, and the approximate drawing explicitly labels 26 inches loaded. Compare measurements taken in the same load condition.
Why are two arch measurements shown?
The specification table lists Load Arch Length as 2 without an explicit unit, while the approximate drawing labels 3.125 inches loaded. Lippert does not reconcile those values on this page; confirm the required arch against original equipment before ordering.
What other part references are listed?
Lippert lists Standens 72-78, Dexter compatible part number 072-078-00, Jayco 0227024 and Keystone 439411. These references do not establish that every axle or RV from those brands uses this spring.
What is included?
One double-eye spring with pre-installed nylon bushings. Bronze bushings and hanger kits are sold separately; pre-mounted hangers are required. A complete suspension, axle, wheels and separate mounting hardware are not documented as included.
Does it fit competitor axles?
Lippert describes compatibility with Lippert and most competitor trailer axles but names no exact parent axle model on the focused page or general manual. Confirm capacity, unloaded length, width, eye and bushing dimensions, arch and mounting arrangement.
Are the package measurements the spring dimensions?
No. The 27.5 x 7 x 3-inch package and 14.5-pound shipping weight are shipping data. The item is listed as 25.25 inches long, 1.75 inches wide and 13.900 pounds.
Can I reuse the U-bolts?
The linked general manual CCD-0011277 says not to reuse U-bolts or nuts during double-eye spring replacement. Use the correct new hardware and instructions for the installed assembly; hardware size and axle rating determine the applicable torque specification.
Can I replace this with the 2,600-pound spring?
Spring 702095 / 72-97 has a different capacity. Shared width or unloaded length does not establish interchangeability. Choose the spring specified for the installed suspension rather than substituting by appearance.
| Sku | 129745 |
|---|---|
| Brand | Lippert |
| Weight capacity | 2,200 lbs. |
| Standens leaf spring number | 72-78 |
| Load length | 26" |
| Spring layer count | 4 |
| Eye to eye length | 25.25 |
| Axle spring type | Double-Eye Leaf |
| Load arch length | 2 |
| Axle type | Spring |
| Hardware type | Spring |
| Unit of measure | EA |
| Item length (inches) | 25.25 |
| Item width (inches) | 1.75 |
| Item weight (pounds) | 13.900 |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Kraft Box |
| Country of origin | CHN |
| Manufacturer reference number | 129745 |
| Reference vendor/manufacturer name | Lippert |
| Dexter compatible part number | 072-078-00 |
| Jayco part number | 0227024 |
| Keystone rv part number | 439411 |
| Upc | 848150010438 |
| Shipping dimensions | 27.5" L x 7" W x 3" H, 14.5 lbs. |
| Approximate drawing - loaded length | 26 inches |
| Approximate drawing - loaded arch | 3.125 inches; differs from Load Arch Length table field 2 |
| Approximate drawing - width range | 1.72 to 1.79 inches |
| Approximate drawing - eye opening callout | 0.573 to 0.603 inches; verify installed bushing and hardware |
- Is 2,200 pounds the axle capacity? Lippert states a 2,200-pound spring assembly capacity. This is not a rating for a complete axle, trailer or suspension. Match the original equipment requirements and ratings.
- Is the spring 25.25 or 26 inches long? The title and Eye To Eye Length field specify 25.25 inches unloaded. The Load Length field is 26 inches, and the approximate drawing explicitly labels 26 inches loaded. Compare measurements taken in the same load condition.
- Why are two arch measurements shown? The specification table lists Load Arch Length as 2 without an explicit unit, while the approximate drawing labels 3.125 inches loaded. Lippert does not reconcile those values on this page; confirm the required arch against original equipment before ordering.
- What other part references are listed? Lippert lists Standens 72-78, Dexter compatible part number 072-078-00, Jayco 0227024 and Keystone 439411. These references do not establish that every axle or RV from those brands uses this spring.
- What is included? One double-eye spring with pre-installed nylon bushings. Bronze bushings and hanger kits are sold separately; pre-mounted hangers are required. A complete suspension, axle, wheels and separate mounting hardware are not documented as included.
- Does it fit competitor axles? Lippert describes compatibility with Lippert and most competitor trailer axles but names no exact parent axle model on the focused page or general manual. Confirm capacity, unloaded length, width, eye and bushing dimensions, arch and mounting arrangement.
- Are the package measurements the spring dimensions? No. The 27.5 x 7 x 3-inch package and 14.5-pound shipping weight are shipping data. The item is listed as 25.25 inches long, 1.75 inches wide and 13.900 pounds.
- Can i reuse the u-bolts? The linked general manual CCD-0011277 says not to reuse U-bolts or nuts during double-eye spring replacement. Use the correct new hardware and instructions for the installed assembly; hardware size and axle rating determine the applicable torque specification.
- Can i replace this with the 2,600-pound spring? Spring 702095 / 72-97 has a different capacity. Shared width or unloaded length does not establish interchangeability. Choose the spring specified for the installed suspension rather than substituting by appearance.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.






