Lippert 12K–16K Trailer Bearing Replacement Kit - 2023133986
---
Replacement Bearing Kit for a Verified 12K–16K Hub Application
Lippert 2023133986 is a one-hub bearing replacement kit listed for 12,000-, 14,000- and 16,000-pound axle applications. It includes inner and outer bearing components, cups, a grease seal and cotter pin; the description also mentions a tang washer.
Confirm the exact component markings before ordering or service. Lippert’s specifications, quick facts and photographed packaging disagree on the outer race reference. The 3.125-inch dimension is also labeled differently between the table, URL and box. Those differences are stated below instead of being resolved by an assumed part number.
Why Choose This Bearing Kit?
- One-hub service kit: The manufacturer describes components to service one axle hub, not a complete axle pair.
- 12K through 16K application range: The axle-capacity fields list 12,000, 14,000 and 16,000 pounds; the option label is 16,000 pounds.
- Inner components identified: The published inner-bearing reference is 3984 and the inner cup is 3920.
- Bearings, cups and seal: The included-items field names inner and outer bearings, inner and outer races, grease seal and cotter pin.
- Tang washer wording: The description additionally specifies a tang washer for competitor applications that use that arrangement.
- Original identifiers retained: Match SKU 2023133986 and UPC 848150067845, then verify every component marking before installation.
Technical Specifications
- SKU: 2023133986
- Brand: Lippert
- Weight Capacity: 16,000 lbs.
- Inner Bearing Reference Number: 3984
- Outer Bearing Reference Number: 28622
- Outer Race Cup Reference Number: 28622
- Inner Race Cup Reference Number: 3920
- Axle Capacity: 12,000 lbs., 14,000 lbs., 16,000 lbs.
- Hardware Type: Bearing Kit
- Inner Diameter: 3.125"
- Unit of Measure: EA
- Warranty Term: 1 Year
- Quantity In Package: 1
- Package Type: Retail Box
- Country of Origin: CHN
- UPC: 848150067845
- Shipping Dimensions: 6.5" L x 6" W x 5" H, 4.8 lbs.
- Source-reference conflict: Outer race cup 28622 in table;28682 in quick facts;26862 on photographed box. Verify exact markings.
Before You Order
Match 2023133986 and UPC 848150067845 to the original equipment record. Confirm the cone and cup numbers, seal dimensions and spindle retention system. Inner bearing 3984 and inner cup 3920 are consistent on the focused source; the outer component references require verification. The generic cross-brand statement and 16,000-pound option label do not identify an exact parent hub or axle.
Which outer bearing and race references are correct?
The source is inconsistent. The specifications table lists outer bearing 28622 and outer race cup 28622. Quick facts instead give outer race 28682, while the photographed box prints outer race 26862. The box and quick facts also label 28622 as the outer bearing. These values are preserved as conflicting source references; verify the supplied markings and the original assembly with the manufacturer before installation.
What does the 3.125-inch dimension describe?
The table labels it Inner Diameter, the product URL refers to a 3.125-inch seal, and the box describes a 3.125-inch spindle diameter. The page gives no component-level dimension drawing resolving those labels. Do not treat 3.125 inches as the bore of every bearing or as a complete spindle-fit specification.
Is the kit for one hub or both sides of an axle?
The feature copy describes repacking one axle hub, and quantity in package is one kit. It is not represented as two complete hub-service sets.
Is the tang washer included?
The description and feature copy say a tang spindle washer is supplied, although it is not separately itemized in the included-items field or shown among the loose parts in the gallery. The manufacturer says to reuse the existing washer for a Lippert axle and use the supplied tang washer for a competitor assembly that uses that arrangement. Confirm the actual retention system and supplied contents before service.
Will it fit every 12,000-16,000-pound axle hub?
No exact universal fit is established. Lippert lists that capacity range and compatibility with most competitor hubs, but the bearing and race references conflict. Compare the actual cones, cups, seal fit and spindle-retention design; capacity alone cannot establish fit.
Are these bearings already packed with grease?
The gallery shows loose bearings, cups, seal and cotter pin, and the page does not promise factory-prepacked bearings or a supplied lubricant. Follow the confirmed assembly instructions for the required lubrication and adjustment.
Can the linked guide supply the spindle-nut torque?
The linked August 22, 2024 bearing-replacement article uses a demonstration assembly and expressly defers to the equipment manual. Its 55 ft-lb example is not an exact specification for this kit or every 12K-16K spindle. Use the instructions for the identified axle and retention hardware.
Does this increase axle capacity?
No. The 16,000-pound option label and listed 12K/14K/16K axle range describe applications. Replacing bearings does not raise the axle, hub, wheel, tire or trailer rating.
Compare a Separate Hub Assembly
The Lippert 2024029112 12K threaded idler hub is a separately listed hub assembly with its own bearing and retention requirements. This link is for package comparison and does not establish that 2023133986 fits that hub.
The 6.5 x 6 x 5-inch dimensions and 4.8-pound weight are shipping fields, not bearing or seal measurements.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 2023133986 |
|---|---|
| Brand | Lippert |
| Weight capacity | 16,000 lbs. |
| Inner bearing reference number | 3984 |
| Outer bearing reference number | 28622 |
| Outer race cup reference number | 28622 |
| Inner race cup reference number | 3920 |
| Axle capacity | 12,000 lbs., 14,000 lbs., 16,000 lbs. |
| Hardware type | Bearing Kit |
| Inner diameter | 3.125" |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Quantity in package | 1 |
| Package type | Retail Box |
| Country of origin | CHN |
| Upc | 848150067845 |
| Shipping dimensions | 6.5" L x 6" W x 5" H, 4.8 lbs. |
- Which outer bearing and race references are correct? The source is inconsistent. The specifications table lists outer bearing 28622 and outer race cup 28622. Quick facts instead give outer race 28682, while the photographed box prints outer race 26862. The box and quick facts also label 28622 as the outer bearing. These values are preserved as conflicting source references; verify the supplied markings and the original assembly with the manufacturer before installation.
- What does the 3.125-inch dimension describe? The table labels it Inner Diameter, the product URL refers to a 3.125-inch seal, and the box describes a 3.125-inch spindle diameter. The page gives no component-level dimension drawing resolving those labels. Do not treat 3.125 inches as the bore of every bearing or as a complete spindle-fit specification.
- Is the kit for one hub or both sides of an axle? The feature copy describes repacking one axle hub, and quantity in package is one kit. It is not represented as two complete hub-service sets.
- Is the tang washer included? The description and feature copy say a tang spindle washer is supplied, although it is not separately itemized in the included-items field or shown among the loose parts in the gallery. The manufacturer says to reuse the existing washer for a Lippert axle and use the supplied tang washer for a competitor assembly that uses that arrangement. Confirm the actual retention system and supplied contents before service.
- Will it fit every 12,000-16,000-pound axle hub? No exact universal fit is established. Lippert lists that capacity range and compatibility with most competitor hubs, but the bearing and race references conflict. Compare the actual cones, cups, seal fit and spindle-retention design; capacity alone cannot establish fit.
- Are these bearings already packed with grease? The gallery shows loose bearings, cups, seal and cotter pin, and the page does not promise factory-prepacked bearings or a supplied lubricant. Follow the confirmed assembly instructions for the required lubrication and adjustment.
- Can the linked guide supply the spindle-nut torque? The linked August 22, 2024 bearing-replacement article uses a demonstration assembly and expressly defers to the equipment manual. Its 55 ft-lb example is not an exact specification for this kit or every 12K-16K spindle. Use the instructions for the identified axle and retention hardware.
- Does this increase axle capacity? No. The 16,000-pound option label and listed 12K/14K/16K axle range describe applications. Replacing bearings does not raise the axle, hub, wheel, tire or trailer rating.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.






