Lippert 122739 Through-Frame Slide-Out 18-Tooth Spur Gear
Ready to order
Lippert 122739 Through-Frame Slide-Out 18-Tooth Spur Gear
---
Lippert 122739 Through-Frame Slide-Out 18-Tooth Spur Gear
Lippert 122739 is a replacement 18-tooth spur gear for Lippert Through-Frame RV slide-outs. Its published tooth specification is 12 DP with a 14.5-degree pressure angle. Match the original gear, slide-out system and rack specification before choosing this part to replace a worn or damaged gear.
The package contains one gear only. A complete gear pack, slide-out assembly, motor, rack, mounting hardware and wear pads are not included as itemized contents. The hexagonal center opening is visible in the manufacturer photos; the focused page does not state its across-flats measurement.
Why Choose This Replacement Spur Gear?
- 18-tooth replacement: For the matching Lippert Through-Frame slide-out application.
- 12 DP / 14.5-degree specification: Check the original gear and rack; tooth count alone does not establish fit.
- Gear only: One service gear rather than a complete slide-out or gear-pack assembly.
- OEM references: Heartland 0132941, Jayco 0237099, Keystone 383906 and Winnebago 2T0590-10-026 are listed by Lippert.
- Approximate width: The manufacturer side-view graphic shows 0.75 inch; shipping measurements are listed separately.
Technical Specifications
- SKU: 122739
- Brand: Lippert
- Hardware Type: Gear
- Quantity In Package: 1
- Warranty Term: 1 Year
- Country of Origin: USA
- Unit of Measure: EA
- Reference Vendor/Manufacturer Name: Lippert
- Heartland Part Number: 0132941
- Jayco Part Number: 0237099
- Keystone RV Part Number: 383906
- Winnebago Part Number: 2T0590-10-026
- UPC: 848150057433
- Shipping Dimensions: 1.67" L x 0.75" W x 0.62" H, 0.26 lbs.
- Tooth count: 18
- Diametral pitch: 12 DP
- Pressure angle: 14.5 degrees
- Approximate gear width: 0.75 inch (manufacturer side-view graphic)
Before You Order
Count the teeth on your original gear and verify the 12 DP / 14.5-degree specification, shaft interface and slide-out equipment identity. An RV year or a similar-looking gear is not sufficient confirmation. The source does not give a bore dimension, fastener torque or universal parent-system list.
Is this the same thing as gear pack 123356?
No. Part 122739 is the separate 18-tooth spur gear. Lippert states that gear pack 123356 includes a 15-tooth gear and that an 18-tooth gear, part 122739, must be purchased separately when required. Confirm your original system and rack before combining service components.
Can I select this by RV model year?
Lippert’s 123356 page says units manufactured before October 2013 use an 18-tooth gear. That refers to the slide-out equipment and does not prove fit by RV model year alone. Count the teeth and match 12 DP, 14.5-degree pressure angle, shaft interface and the applicable equipment documentation.
What comes in the package?
The package contains one gear only. A complete gear pack, slide-out assembly, motor, rack, mounting hardware and wear pads are not included as itemized contents. The hexagonal center opening is visible in the manufacturer photos; the focused page does not state its across-flats measurement.
What measurements are confirmed?
The side-view graphic labels the gear width approximately 0.75 inch. The front-view graphic labels individual tooth details 0.07, 0.131 and 0.156 inch; these are not bore or overall-diameter measurements. The specifications separately label shipping dimensions 1.67 x 0.75 x 0.62 inches and weight 0.26 pound. Do not use that package height as a shaft-opening measurement.
Are installation instructions supplied here?
The focused product page links general Lippert support rather than a SKU-specific installation PDF. Lippert describes an exact-match replacement requiring no gear assembly, but the service procedure, support of the room, shaft retention, timing, lubrication and torque must come from the matched slide-out documentation.
Does this fit In-Wall or every Through-Frame slide-out?
The source identifies Through-Frame applications, not universal compatibility or In-Wall fitment. Match part 122739 and its complete tooth and shaft specification to the original equipment before ordering.
Related Gear-Pack Information
See Lippert 123356 2.5 x 2.5 heavy-duty Through-Frame gear pack for the manufacturer’s 15-tooth included / 18-tooth sold-separately distinction. This is related service information, not a universal interchange claim.
For identification only, compare the separately listed Lippert 116658 26-tooth crown gear. A crown gear with a different tooth count is a different component, not a substitute for this 18-tooth spur gear.
Manufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.
| Sku | 122739 |
|---|---|
| Brand | Lippert |
| Hardware type | Gear |
| Quantity in package | 1 |
| Warranty term | 1 Year |
| Country of origin | USA |
| Unit of measure | EA |
| Reference vendor/manufacturer name | Lippert |
| Heartland part number | 0132941 |
| Jayco part number | 0237099 |
| Keystone rv part number | 383906 |
| Winnebago part number | 2T0590-10-026 |
| Upc | 848150057433 |
| Shipping dimensions | 1.67" L x 0.75" W x 0.62" H, 0.26 lbs. |
| Tooth count | 18 |
| Diametral pitch | 12 DP |
| Pressure angle | 14.5 degrees |
| Approximate gear width | 0.75 inch (manufacturer side-view graphic) |
- Is this the same thing as gear pack 123356? No. Part 122739 is the separate 18-tooth spur gear. Lippert states that gear pack 123356 includes a 15-tooth gear and that an 18-tooth gear, part 122739, must be purchased separately when required. Confirm your original system and rack before combining service components.
- Can i select this by rv model year? Lippert’s 123356 page says units manufactured before October 2013 use an 18-tooth gear. That refers to the slide-out equipment and does not prove fit by RV model year alone. Count the teeth and match 12 DP, 14.5-degree pressure angle, shaft interface and the applicable equipment documentation.
- What comes in the package? The package contains one gear only. A complete gear pack, slide-out assembly, motor, rack, mounting hardware and wear pads are not included as itemized contents. The hexagonal center opening is visible in the manufacturer photos; the focused page does not state its across-flats measurement.
- What measurements are confirmed? The side-view graphic labels the gear width approximately 0.75 inch. The front-view graphic labels individual tooth details 0.07, 0.131 and 0.156 inch; these are not bore or overall-diameter measurements. The specifications separately label shipping dimensions 1.67 x 0.75 x 0.62 inches and weight 0.26 pound. Do not use that package height as a shaft-opening measurement.
- Are installation instructions supplied here? The focused product page links general Lippert support rather than a SKU-specific installation PDF. Lippert describes an exact-match replacement requiring no gear assembly, but the service procedure, support of the room, shaft retention, timing, lubrication and torque must come from the matched slide-out documentation.
- Does this fit in-wall or every through-frame slide-out? The source identifies Through-Frame applications, not universal compatibility or In-Wall fitment. Match part 122739 and its complete tooth and shaft specification to the original equipment before ordering.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.











