Lippert 10K Short Oil Brake Hub with Bearing Kit - 2025048502
Ready to order
Lippert 10K Short Oil Brake Hub with Bearing Kit - 2025048502
---
Lippert 10K Short Oil Brake Hub with Bearing Kit - 2025048502
Lippert 2025048502 is a short threaded oil brake hub assembly with an installed bearing kit for a matching 10,000-pound axle application. The exact title specifies a 12-1/4-inch brake hub, an 8 on 6-1/2-inch bolt pattern and 5/8-inch wheel studs. It supplies the rotating drum surface for the matching brake shoes.
The manufacturer itemizes the brake hub assembly and bearing kit. Races and zinc-plated wheel studs are pre-installed. This is one wheel-end assembly, not an axle pair or a complete brake system. A brake backing plate, wheel, spindle, ABS sensor and threaded dust cap are not separately itemized as included. The exact bearing and seal part numbers are not supplied by the focused page.
Why Choose This Part?
- Axle application: Matching 10,000-lb. short axle configuration.
- Brake and wheel interface: 12-1/4-inch brake hub; 8 on 6-1/2-inch pattern; 5/8-inch studs.
- Construction: Cast iron with pre-installed races and zinc-plated studs.
- Bearing kit: Installed bearing kit listed with this SKU.
- Cap interface: Accepts matched Valcrum threaded dust caps; cap inclusion is not established.
Technical Specifications
- SKU: 2025048502
- Brand: Lippert
- Axle Type: Short
- Hardware Type: Hub
- Unit of Measure: EA
- Warranty Term: 1 Year
- Country of Origin: USA
- UPC: 848150079404
- Shipping Dimensions: 17" L x 15" W x 15.5" H, 69.9 lbs.
- Axle application (title): 10,000-lb. short axle; not a single-hub capacity
- Brake hub size (title): 12-1/4 inches
- Bolt pattern (title): 8 on 6-1/2 inches
- Stud size (title): 5/8 inch
- Package contents: One brake hub assembly with installed bearing kit
- Material: Cast iron
Before You Order
Confirm 2025048502 against the axle identification, short spindle geometry, bearings and seals, brake dimensions, 8 on 6-1/2-inch pattern and 5/8-inch studs. The axle rating is an application reference, not a single-hub load rating or permission to uprate the trailer. The source lists compatibility with matching electric or hydraulic drum brakes; generic competitor-axle wording is not universal fit and does not establish Lippert ABS or Dexter ABS compatibility.
Installation and Reference Notes
The title identifies an oil hub, while general page copy discusses both grease and oil and describes clear-lens and vented magnetic cap features. Those statements do not identify a cap or lubricant supplied in this package; confirm the installed bearing/seal and cap requirements. The linked support manual CCD-0011132, revision June 23, 2026, gives general brake-hub service information and explicitly says assemblies may differ. Its generic pry-off / mallet dust-cap steps are not directions for a threaded Valcrum cap. Use the matched axle, cap and lubrication instructions; select wheel torque for the actual wheel and fastener combination rather than one universal 5/8-inch value. The 17 x 15 x 15.5-inch, 69.9-pound figures are shipping references.
Related Parts
Browse related RV parts; confirm each part against the installed equipment.
Manuals and Documents
| Sku | 2025048502 |
|---|---|
| Brand | Lippert |
| Axle type | Short |
| Hardware type | Hub |
| Unit of measure | EA |
| Warranty term | 1 Year |
| Country of origin | USA |
| Upc | 848150079404 |
| Shipping dimensions | 17" L x 15" W x 15.5" H, 69.9 lbs. |
| Axle application (title) | 10,000-lb. short axle; not a single-hub capacity |
| Brake hub size (title) | 12-1/4 inches |
| Bolt pattern (title) | 8 on 6-1/2 inches |
| Stud size (title) | 5/8 inch |
| Package contents | One brake hub assembly with installed bearing kit |
| Material | Cast iron |
- Are bearings included? The exact title and contents list an installed bearing kit with the brake hub assembly. Individual bearing and seal numbers are not established here.
- Is a dust cap included? The page says it accepts Valcrum threaded dust caps, but a separate cap is not itemized in the contents. Confirm the exact cap needed.
- Is this a pair of hubs? No. This listing is one wheel-end assembly with bearing kit, not an axle pair.
- Will it fit any 10k axle? No universal fit is established. Match the short spindle, bearing and seal dimensions, brake size, stud size and bolt pattern.
- Can i follow generic press-in cap instructions? This hub has a threaded cap interface. Use the matched cap instructions; generic pry-off and mallet illustrations are not exact threaded-cap procedures.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.









