Furrion Solar Panel Electrical Rooftop Box #FSEB30JWO2-BL
---
FSEB30JWO2-BL Rooftop Solar Connection Box — MC4 Connectors
Furrion 2022009018 / FSEB30JWO2-BL is a rooftop solar wire connection box with MC4 connectors. Match the actual connector system, polarity, wire size and installed charge-controller limits before ordering.
Identify the connector generation
Lippert lists this MC4 model as superseding 2021123870 / FSEB30JWO-BL. The older box uses Furrion connectors, so the replacement listing is not proof that existing plugs connect directly. Identify the older FSEB30JWO-BL box.
This connection box does not replace a charge controller, provide a parallel combining harness or establish panel-to-controller electrical compatibility. The separate C-FSFP50MAT-002 50W maintainer box is a wire-entry housing, not this plug-connector model.
Roof installation and array limits
The exact instructions show a roof cable passage, screw attachment and sealing around screw holes and the box perimeter. Follow those instructions and the roof manufacturer requirements. The box is IP65 rated when properly mounted with sealant; protection depends on installation.
The manual depicts multiple panels in series and explicitly says not to connect them in parallel. This is not permission to add arbitrary panels in series: verify cold-weather array voltage, current, polarity, connector matching and charge-controller limits with a qualified installer.
Check the actual box before layout
The MC4 sales sheet has conflicting imperial and metric dimension entries and separate enclosure/connector protection claims. Use the exact installation drawing and physical box for layout rather than shipping dimensions or an assumed whole-box IP67 rating.
Solar panels, controller and a complete roof-wiring system are not included.
FSEB30JWO2-BL installation instructions identify the connector type and roof installation steps.
| Manufacturer | Furrion |
|---|---|
| Part number | 2022009018 |
| Model | FSEB30JWO2-BL |
| Connector system | MC4 |
| Function | Rooftop solar cable connection and routing box |
| Generation distinction | Supersedes FSEB30JWO-BL / 2021123870; connector change must be checked |
| Protection rating | IP65 when properly mounted with sealant |
| Installation | Roof cable passage, screws and perimeter sealing per exact manual |
| Array limitation | Manual shows series only, not parallel; controller and electrical design must permit the array |
| Package | Connection box; no solar panel or charge controller |
| Dimension verification | The manufacturer drawing shows 124 × 174 × 36 mm, while the sheet’s inch summary conflicts with it. Confirm the actual housing and mounting-hole layout before cutting or drilling; package dimensions are not installation measurements. |
| Dimension reference | CCD0006137 V1.3 MC4 box sheet |
- Which connectors does this model use? MC4 connectors. Confirm the installed connectors, polarity and ratings; shared brand does not prove a direct fit.
- Is installation drill-free? The exact instructions require a roof cable passage and show screw attachment with sealing. Do not rely on a blanket drill-free claim.
- Can i connect multiple panels in parallel? The box instructions explicitly say not to connect panels in parallel. Any series array also needs an approved controller and electrical design.
- Does the successor use the same plugs? The older FSEB30JWO-BL uses Furrion connectors; the FSEB30JWO2-BL successor uses MC4. Check wiring and connector changes before replacement.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.




