Furrion 100W Portable Kickstand Solar Panel - Pwm Bundle Kit #FSPK10MWT-BL
---
FSPK10MWT-BL 100W Portable Solar Panel with 10A PWM Controller
Furrion 2021123833 / FSPK10MWT-BL is the 100W kickstand solar panel and 10A PWM charge-controller bundle. It is a portable ground-use kit; confirm the receiving inlet, battery and charging path before connecting it.
What the PWM bundle contains
The exact FSPK10MWT-BL user manual lists a 100W solar panel, a 10A PWM charge controller, user instructions and warranty instructions. Its diagram shows the controller as a separate device in the connection path. Do not treat it as a controller permanently integrated into the panel.
The related FSPK10MWN-BL panel and FSPK10MWD-BL ePod-adapter bundle are separately identified configurations. An ePod adapter or other adapter cable is not established as part of this PWM bundle. Older sales-sheet footnotes conflict about controller inclusion; the exact bundle manual identifies the supplied controller. Check the actual package and model label before relying on extra accessories.
Choose the correct charging path
For the documented 12V battery application, the manual connects the panel to the supplied PWM controller and then the controller to a compatible Furrion solar inlet. The panel does not connect straight to an unregulated battery. Confirm inlet polarity, wiring, protection and battery requirements; a Furrion name alone does not certify every inlet or RV installation.
The manual separately illustrates compatible Furrion ePod and eRove solar-input charging with a battery installed. Follow the exact receiving-device manual and connector requirements for that path. Match the exact receiving-device model and instructions; these examples do not establish compatibility with every Furrion inlet, power station, cooler or replacement controller.
Setup and battery selection
Use stable, level ground, secure the kickstand and keep cables away from standing water and travel paths. The manual prohibits setup on roofs or tables and suspension from elevated supports. It lists battery modes for sealed, gel and flooded lead-acid and lithium iron phosphate batteries; set the correct mode for the installed battery.
The manual rates the junction box IP65. That is not an all-weather operating guarantee for the complete kit, and the standing-water restriction still applies. Legacy gallery captions do not override the manual.
Dimensions and identification
The exact bundle manual gives a panel size of 870 × 670 × 35 mm. Some family-sheet diagrams and tables disagree, so use the actual model and measured panel for a tight storage space; shipping-box dimensions are not panel dimensions.
FSPK10MWT-BL user manual, CCD-0005570 documents package contents, connection paths and use limits. Furrion kickstand family sheet, CCD-0007268 distinguishes the PWM and ePod-adapter bundles.
| Manufacturer | Furrion |
|---|---|
| Part number | 2021123833 |
| Model | FSPK10MWT-BL |
| Panel rated power | 100W under standard test conditions; actual output varies |
| Solar cells | Monocrystalline |
| Included controller | Separate 10A PWM controller documented in exact bundle manual |
| Battery application | 12V system through the supplied controller and compatible Furrion inlet |
| Battery modes | Sealed, gel and flooded lead-acid; lithium iron phosphate; correct setting required |
| Panel dimensions in exact manual | 870 x 670 x 35 mm; confirm actual model where space is critical |
| Panel cable | 4.6 m, approximately 15 ft; DC connector per manual |
| Junction-box rating | IP65; not whole-kit immersion or all-weather approval |
| Setup | Stable level ground; no roofs, tables, elevated supports or standing water |
| Bundle distinction | FSPK10MWD-BL is the separate ePod-adapter bundle; no extra adapter included by assumption |
- Is the controller included or built into the panel? The exact FSPK10MWT-BL manual lists a supplied 10A PWM controller and depicts it as a separate device. Older generic footnotes do not define this bundle.
- Can the panel connect straight to a 12v battery? No unregulated direct-battery connection is established. The manual routes this application through the supplied PWM controller and a compatible Furrion inlet.
- Does every furrion inlet or power station fit? No exact universal fit is established. Match connector, polarity, wiring, electrical limits and the receiving-device manual.
- Can i leave it on the rv roof or in standing water? The manual prohibits elevated-surface setup and standing water. Use stable level ground and follow the exact instructions.
- Is an epod adapter included? The family sheet identifies the ePod-adapter bundle separately as FSPK10MWD-BL. Do not assume its adapter is included in FSPK10MWT-BL.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.







