Add fittings, connections and patch holes on your tank.
ERVP can also install the fittings on your tanks. Just print out the drawing or picture of the tank and select the fittings you want us to spin-weld to your tank. Note where each fitting should be located with the fitting part #. Email the drawing to email@example.com and we will reply with a quote once our technicians review. Spin-welding is the only way to secure the fittings to your tank so they don't come loose. Please call with questions at 574-675-6919.
If you're already purchasing an RV holding tank from us, chances are you will need the fittings installed specific to your application. We have the tools and know how to custom spin-weld your fittings in place exactly where you need them.
Why use our custom tank welding process for your fittings?
• OEM Certified Application Process. • Get your tank the same way it was installed the day you bought it. • Permanent Leak Proof Process. • Tank welding ensures no seam or void can develop at your fitting which is a traditional stress point. • Simple For You. • The tools and training to custom spin weld fittings onto a holding tank are expensive. • Let our staff do it for you to get it right the first time. • Triple QC Check: Every tank we add spin welded fittings to undergoes a rigorous Triple Quality Control Test. • Impact Proof: Your fittings will be tested for durability to ensure a permanent seal has been made. • Air Tight: Air is thinner than water, so we pressure test your tank by injecting air and spraying a special soap like solution on the seams to look for seal voids. • Water Tight: Once complete, we submerge your tank underwater and check for bubbles and leaks.
**PLEASE NOTE** Once added to your order, you will need to email us a fittings installation schematic (picture / drawings) with exact location and measurements where you want them installed and which fittings in their locations. Without this information your tank will be delayed.
Email your schematic (picture/drawing) to firstname.lastname@example.org or fax it to (574) 293-7004 - please include a cover sheet with ATTN: Elkhart RV Parts Spin-Welding
Excellent adhesion. Permanently flexible. Non-stringing. Non-staining. Adco B-100 Butyl Rubber Sealant is a single component, solvent release butyl based sealant specifically designed to provide excellent exterior weathering properties. It is easy to apply and tool and assures superior adhesion to a variety of clean surfaces. Adco B-100 Butyl Rubber Sealant is an excellent choice for exterior sealing applications and is compatible with an array of substrates such as glass, metals, concrete, wood, masonry and some plastics. Color: Black Cartridge : 10.3 fl oz (305 ml) Application Instructions: 1. All surfaces must be clean and dry. 2. Apply with a standard caulking gun. 3. Cut nozzle to desired bead size. Puncture inner seal. 4. Apply at a 45° angle using constant pressure. 5. Use at room temperature for ease of gunning. 6. Tool or join surfaces for sealing before material skins. 7. Support tooled or joined surfaces for 8 hours minimum. 8. Use mineral spirits or VM&P Naphtha to remove excess material before skin forms. Limitations: All surfaces to be sealed or bonded must be clean and dry and free from contaminants. Primer may be required for certain surfaces. ADCO B-100 is not recommended for use in window glazing applications or hidden joint details, which require a non-skinning, non-hardening sealant.