The Slow-Roll Shower Door from Irvine Shade is a space-saving, easy-to-use solution for your RV shower. This guide walks you through everything you need to install it quickly and correctly, with just a few basic tools. Whether you're upgrading or replacing an old door, follow the steps below to get a clean, secure fit.
What’s Included
- Slow-Roll Shower Screen Assembly (cassette with retractable screen)
- 2 Side Rails (pre-applied adhesive tape)
- 1 Bottom Track
- End Caps
- Installation Instructions right here online (no paper copy is included. Paper is not interactive)
Tools Needed
- Phillips screwdriver
- Measuring tape
- Level
- Pencil
- Utility knife
- (Optional) Silicone sealant for extra water protection
Step-by-Step Installation
-
Preparation
- Clean the shower opening so it’s free of dust and debris.
- Double-check that the opening dimensions match the door assembly.
-
Install Side Rails
- Hold the side rails vertically; mark screw-hole locations and drill pilot holes.
Because each RV wall is different material. You will need to provide your own screws based on what you are drilling into - Peel the adhesive backing, align rails, press firmly, then fasten screws.
- Hold the side rails vertically; mark screw-hole locations and drill pilot holes.
-
Install Bottom Track
- Measure and trim the track (if needed) so it fits snugly between side rails.
- Press the track into place; run a thin bead of silicone along the edges if desired.
-
Install Shower Screen Assembly
- Choose which side you want the cassette mounted.
- Align the cassette with the bottom track and side rail.
- Secure it using the pre-drilled holes and supplied screws.
-
Attach End Caps
- Snap end caps onto the tops and bottoms of both side rails and the cassette.
-
Test the Door
- Fully extend the screen and latch it.
- Release to confirm smooth retraction and proper alignment.
Maintenance Tips
- Wipe the screen with a damp cloth regularly.
- Inspect rails and screen for wear or damage each season.
- If retraction feels stiff, apply a silicone-based lubricant to the rails.
Need a visual? Watch the install video on YouTube.
Still have questions? Email us and our team will get you squared away.

