Lippert Quick Drop Stabilizer – End the Bounce, Start the Adventure
Your RV shouldn’t feel like a roller-coaster every time someone walks inside. A Lippert Quick Drop stabilizer eliminates the shake and sway in seconds, so you can spend less time setting up and more time enjoying the campground. Ready to dive in? Browse our complete Lippert Quick Drop RV Stabilizer collection here.
What Makes the Quick Drop System Different?
- Instant deployment: Use a cordless drill or hand crank to drop each leg in under 30 seconds.
- All-steel construction: Rugged, powder-coated steel fights rust and road grime.
- Adjustable height: Perfect for travel trailers, fifth wheels, toy haulers and more.
- Space-saving design: Folds tightly against the frame when not in use.
Single-Leg vs. Double-Leg Kits—Which One Fits Your Rig?
The Quick Drop line comes in two core configurations, both engineered for DIY installation.
Best-Selling Kits
-
Quick Drop Single-Leg Stabilizer Kit (Part #2022016064)
Ideal for smaller travel trailers and pop-ups that need one additional point of contact to lock everything in place.
-
Quick Drop Double-Leg Stabilizer Kit (Part #2022016065)
The go-to choice for larger trailers and fifth wheels, providing two points of rock-solid stability and a higher weight capacity.
Installation Tips
- Park on level ground and chock your wheels.
- Hold the mounting bracket to the frame, ensuring clearance for the leg to swing down.
- Mark and drill pilot holes, then secure the bracket with grade-8 bolts.
- Attach the stabilizer leg, torque all hardware to spec, and test the drop action with your drill.
Pro tip: A dab of anti-seize on the bolt threads makes future adjustments painless.
Maintenance & Troubleshooting
- Spray a silicone lubricant on the pivot joints every 3-6 months.
- Inspect for bent legs after rough roads; replace sooner rather than later to prevent frame stress.
- If the leg doesn’t retract fully, check for debris around the pivot and clean as needed.
Final Thoughts
The Lippert Quick Drop stabilizer system is one of the fastest, most cost-effective upgrades you can make to improve campsite comfort. Whether you pick the single-leg or double-leg kit, you’ll eliminate trailer bounce and protect your frame from long-term stress.
Explore all Lippert Quick Drop RV Stabilizers →
Frequently Asked Questions
- How much weight can a Lippert Quick Drop stabilizer support?
- Each leg is rated for up to 1,000 lbs of static load, designed to stabilize—not lift—your RV.
- Do I still need my scissor jacks?
- Many owners keep their original scissor jacks for leveling, then use the Quick Drop stabilizers purely to eliminate movement.
- Can I operate the Quick Drop with a drill?
- Yes. A standard 3/4" socket and cordless drill make deployment almost effortless.
- Will the stabilizer fit my frame size?
- The mounting bracket accommodates most 5" and 8" I-beam frames. Always measure before ordering.
- Is professional installation required?
- No. If you’re comfortable drilling into the RV frame and torquing bolts, the kit is a straightforward DIY project.
