CPI 69L Spinweld Tank Patch — Verify Dimensions
Ready to order
CPI 69L Spinweld Tank Patch — Verify Dimensions
---
Identify SKU 69L before choosing a tank patch
This listing is the CPI tank patch recorded under operational SKU 69L. It is a spin-weld component, not an adhesive repair patch, threaded plug or sensor. The prior store description specified a 3.75-inch pilot, 4.50-inch outside diameter and 3-3/4-inch hole. Those dimensions remain legacy identification claims; they are not confirmed cutting instructions for this stocked 69L.
69L and manufacturer part 69 are not a verified match
CPI's reviewed public catalog and part #69 detail identify #69 as a 3.120-inch pilot by 4.500-inch outside-diameter patch. They do not define an L suffix or establish that #69 and the store's #69L have the same pilot, dimensions or tooling. The separate 3.120-inch figure must not be substituted as a measurement of SKU 69L. A shared 4.50-inch outside-diameter label does not prove equivalence.
No exact 69L dimensioned drawing, stock measurement or manufacturer-confirmed cross-reference was obtained. Confirm actual pilot diameter, flange OD, thickness, height, weld-contact geometry and driver clearance before selecting or cutting. The legacy pilot and hole labels cannot both serve as a clearance specification: CPI's process calls for an opening slightly larger than the actual pilot so the fitting can rotate freely.
Check the photographed configuration
The current gallery contains five records. Four show two repeated views of a natural/off-white circular component: a closed face with two raised driving posts, and an opposite face with an annular pilot. The fifth image shows an open center. That difference does not establish which closed/open configuration is supplied. No image includes a measurement scale or proves exact resin. Confirm the actual stock configuration against the required repair; the general resemblance to CPI's #69 photos does not certify #69L identity or dimensions.
Material and installation requirements
CPI's spin-welding guidance requires compatible fitting and tank materials, a suitable flat contact area, free rotation and appropriate high-speed equipment. CPI describes its standard fittings as high-molecular-weight low-density polyethylene, while other material/color options are available. That general statement does not identify the resin of this particular stocked item or approve every polyethylene tank. CPI does not recommend spin welding cross-linked polyethylene.
A qualified installer must verify the patch, tank material, remaining sound wall, opening, weld area and exact driver before installation. CPI does not recommend a hand drill or drill press because the required speed cannot be attained. Its general router/shank guidance does not establish an exact 69L driver part number, tool engagement, weld settings, wall-thickness range or service rating.
This listing is for the patch component. A router, driver, tank, adhesive, gasket, sealant, sensor or installation kit is not identified as included. Exact pressure, temperature, chemical-resistance and potable-water certification remain unconfirmed. No specific RV, tank family, leakproof repair or permanent service result is guaranteed by this review.
Separate listings for identification
- CPI #69 patch listing: separately recorded as a 3.120-inch pilot by 4.500-inch OD. It is a comparison, not a verified substitute for 69L.
- CPI 69LB black patch listing: a separate SKU with its own legacy dimensions and application claims. Color or a similar part number does not establish the same geometry, resin, driver or fit.
The store also lists LD69L and a separate #69 drive tool. Neither is approved for SKU 69L by the reviewed manufacturer sources. The tool's legacy 3-1/8-inch hole label must not override this patch's unresolved dimensions. Do not transfer dimensions or tooling from #50, #76 or another patch.
| Operational sku | 69L |
|---|---|
| Store vendor | CPI |
| Listed component | Spin-weld tank patch; supplied configuration needs confirmation |
| Legacy pilot claim | 3.75 inches; unverified for actual stock |
| Legacy outside-diameter claim | 4.50 inches; unverified for actual stock |
| Legacy hole claim | 3-3/4 inches; not a confirmed cutting instruction |
| Separate manufacturer #69 | 3.120-inch pilot x 4.500-inch OD; not established 69L equivalence |
| Pilot / opening relationship | Opening must allow free rotation; verify actual pilot and clearance |
| Gallery configuration | Repeated closed views plus one open-center view; no scale |
| Material identification | Actual stock resin unconfirmed; verify compatibility with tank |
| Installation | Spin welding with suitable high-speed equipment and verified driver |
| Hand drill / drill press | Not recommended by CPI |
| Cross-linked polyethylene | Spin welding not recommended by CPI |
| Driver pairing | LD69L and #69 drive tool not verified for SKU 69L |
| Included scope | Patch component; no driver, router, tank, sensor or kit identified as included |
| Unverified limits | Thickness, height, wall range, pressure, temperature, chemical and potable-water ratings |
- What is the size of the hole for the 4-1/2" patch part # 69l? The prior store claim was a 3-3/4-inch hole, but no exact 69L manufacturer drawing or stock measurement confirms it. Do not use that legacy value as a hole-saw instruction. CPI requires an opening slightly larger than the actual pilot so the fitting can rotate freely.
- What are the dimensions of the 4-1/2" patch part # 69l? The legacy description gives a 3.75-inch pilot and 4.50-inch OD; both need confirmation for SKU 69L. CPI separately publishes #69 as 3.120-inch pilot by 4.500-inch OD, without establishing 69L equivalence. Confirm actual geometry, height, thickness and clearance.
- Who is the vendor for the 4-1/2" patch part # 69l? The store vendor is CPI and the operational SKU is 69L. CPI public sources reviewed here identify #69 but do not define the L suffix or confirm an exact cross-reference.
- What type of product is the 4-1/2" patch part # 69l? It is a listed spin-weld tank patch component, not an adhesive patch, threaded plug or sensor. The gallery has both closed and open-center views, so confirm the actual supplied configuration before choosing it.
- Is the 4-1/2" patch part # 69l compatible with a 3.75 inch hole? A 3.75-inch hole alone does not establish fit. The 69L pilot is unverified, and the opening must allow free rotation, compatible material and adequate weld contact. Confirm actual stock and tank requirements before cutting or installation.
- Is the ld69l drive tool confirmed for this patch? No exact 69L-to-LD69L pairing is verified by the reviewed manufacturer sources. Similar labels, a shared OD claim and general shank guidance do not establish tool engagement or fit. The tool and installation equipment are separate.
- Can i install it with a hand drill or use it on any plastic tank? CPI does not recommend hand drills, drill presses or spin welding cross-linked polyethylene. The fitting and tank materials, sound wall, weld area, opening clearance and appropriate high-speed equipment must be verified for the exact application.
- Do the photographs confirm a closed patch and its dimensions? No. Four gallery records repeat two closed-component views, while the fifth shows an open center. There is no measuring scale. The supplied configuration, dimensions, resin and service limits require confirmation; the gallery is not a dimensioned drawing.
Loading customer reviews…
Factory-Fresh OEM Parts — the same brands installed in new RVs straight from Elkhart. Genuine, name-brand components made to order — never generic, never outdated. Sourced directly from the original RV manufacturers for perfect fit and factory-level quality.






