Elkhart RV Parts · Parts finder

CURT Helux Gooseneck Pin Boxes: Model and Pin-Weight Comparison

Choose a Helux gooseneck by the exact part number, measured pin weights and mounting arrangement. The six assemblies below are the gooseneck models covered by CURT’s aftermarket manual CCD-0010079. Their shared 20,000-lb gross towing rating is different from the load carried at the pin box. A larger maximum pin-weight number does not automatically make an assembly the right spring match.

Gooseneck model comparison

The table transcribes page 1 of the linked manual, revision 07/18/25. All weight values are pounds. Scroll the table horizontally on a narrow screen.

Assembly part number Optimal loaded pin weight Minimum unloaded pin weight Maximum loaded pin weight
2024044575 1,650–2,144 1,350 2,350
2024044574 2,145–2,484 1,550 2,700
2024044576 2,485–2,984 1,800 3,200
2024044577 2,985–3,469 2,200 3,900
2024044578 3,470–3,964 2,450 4,300
2024044579 3,965–5,000 2,800 5,000

Resolve the 2024044576 / 2024044577 boundary before choosing. The linked 07/18/25 manual divides their optimal loaded bands at 2,984 / 2,985 lb. A published Lippert overview uses 2,954 / 2,955 lb instead and also differs in its loaded-tank wording. If your measured load falls in the disputed 2,955–2,984-lb band, obtain CURT’s applicable current selection guidance before ordering. Do not resolve the conflict by choosing whichever maximum rating is larger.

These columns have different meanings. The optimal band guides model selection. Minimum unloaded weight refers to the empty-cargo/empty-tank condition; maximum loaded weight includes travel cargo and tanks. Verify both operating conditions, the actual mounting pattern, truck/ball/hitch ratings and required clearance. The towing system is limited by its lowest-rated component.

CURT calls for purchase verification and prefers actual pin weight from certified-scale readings with the trailer loaded for travel. Its GVWR-based estimate is not the same as a measured pin weight. Use the manual’s weighing process and confirm your selected part before purchase or installation.

The six cards below are complete gooseneck pin-box assemblies, not loose springs or a service kit. Current images, prices and ordering availability come from each catalog listing. Similar photographs and a common Helux name do not make the variants interchangeable.

Current replacement listings

Compare current product images, prices and availability. Parts listed together do not necessarily fit every model in this family; use the model links and reference notes to confirm your match.

6 replacement listings

Mounting and source checks

CURT’s exact-model product pages specify the Rhino Box bolt-mounting pattern and a standard 2-5/16-inch gooseneck ball, with the Rockerball cushion ball excluded. Verify the trailer’s existing pin-box label and bolt pattern, bed-rail and turning clearances, level towing position and component ratings with the installer. “Universal” catalog wording is not approval for every trailer or truck.

Use the CURT Helux gooseneck aftermarket manual CCD-0010079, 07/18/25 and the manufacturer’s exact-model specifications when confirming the configuration. Follow the installation manual for support, new mounting hardware, torque, height and clearance requirements; this comparison is not an installation procedure or towing approval. CURT’s manufacturer notice says installed products are not returnable; review the selected item’s current terms before installation.

Gooseneck and fifth-wheel models are separate

The gooseneck assemblies in this table connect to a gooseneck ball. Helux fifth-wheel pin boxes with a kingpin have different part numbers and rating charts. Do not apply their spring or service-part crosswalks to these six gooseneck models. Confirm an exact service part against the assembly label and the correct gooseneck service documentation before replacing a shock, spring, latch or cable.

If specifications disagree across a web overview and a model manual, resolve the revision and load limits before ordering, especially near a model-selection boundary. For a fitment review, send the pin-box label, mounting-pattern photographs, travel-ready and unloaded scale information to our team.