{"product_id":"lippert-abs-7k-brake-hub-kit-red-9-16-in-studs-2025077672","title":"Lippert ABS 7K Brake Hub Kit - Red, 9\/16-in Studs - 2025077672","description":"\u003cdiv\u003e\u003cstrong\u003eElkhartRVParts.com - The Only Authorized Place for Lippert RV Parts\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cstrong\u003e100% Verified Authentic OEM Grade Part\u003c\/strong\u003e\u003c\/div\u003e\u003ch2\u003eLippert ABS 7K Brake Hub Kit - Red, 9\/16-in Studs - 2025077672\u003c\/h2\u003e\u003cp\u003eLippert 2025077672 is a red ABS brake hub complete kit for one wheel end on a matching 7,000-pound axle. It uses a 12-inch brake hub, an 8 on 6-1\/2-inch bolt pattern and 9\/16-inch studs for the listed 16 to 17-1\/2-inch wheel range. Cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes; this hub is not compatible with Dexter ABS.\u003c\/p\u003e\u003cp\u003eThe kit includes pre-greased, installed bearings, pre-installed races and zinc-plated studs, plus a press-in dust cap and spindle hardware. It replaces a matching wheel-end hub; it is not a complete ABS conversion, brake backing-plate assembly, wheel or axle. Match the original spindle, bearings, seals and ABS equipment before ordering.\u003c\/p\u003e\u003ch2\u003eWhy Choose This ABS Hub Kit?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined 7K fit:\u003c\/strong\u003e 12-inch brake hub, 8 on 6.5-inch bolt pattern and 9\/16-inch studs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLippert ABS interface:\u003c\/strong\u003e cast-in tone-ring teeth integrate with the existing sensor and Lippert ABS electric brakes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstalled bearing kit:\u003c\/strong\u003e bearings arrive pre-greased and installed; the source specifies sealed grease lubrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepared hub:\u003c\/strong\u003e cast-iron construction with pre-installed races and corrosion-resistant zinc-plated studs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-in cap:\u003c\/strong\u003e accepts press-in dust caps and includes a cap with plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne wheel end:\u003c\/strong\u003e one kit with eight 60-degree cone lug nuts and spindle hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited warranty:\u003c\/strong\u003e one year for materials or workmanship defects under Lippert's terms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 2025077672\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lippert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e ABS Compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication System:\u003c\/strong\u003e Sealed Grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 7,000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Size:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Style:\u003c\/strong\u003e Brake Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Bolt Pattern:\u003c\/strong\u003e 8 on 6.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Size:\u003c\/strong\u003e 16\" - 17-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Type:\u003c\/strong\u003e Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Type:\u003c\/strong\u003e Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure:\u003c\/strong\u003e EA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Term:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity In Package:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Type:\u003c\/strong\u003e Kraft Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 848150077844\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Dimensions:\u003c\/strong\u003e 15.5\" L x 14\" W x 7.5\" H, 38.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOrigin note: the source table says USA, but the pictured hub and bearing carry China markings. Confirm actual supplied markings if origin matters.\u003c\/p\u003e\u003ch2\u003eBefore You Order\u003c\/h2\u003e\u003cp\u003eConfirm the axle tag, spindle and bearing\/seal match, brake size, wheel bolt circle, stud size, wheel range and original Lippert ABS system. A matching load rating alone does not establish compatibility.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cp\u003eOne ABS brake hub assembly, one dust cap with plug, one 1.75-inch cotter pin, one 1-inch six-slot castle spindle nut, one round spindle washer with 1.06-inch inside and 2-inch outside diameters, and eight 60-degree cone trailer lug nuts. Bearings are pre-greased and installed; races and zinc-plated wheel studs are pre-installed. Quantity is one wheel-end kit in a kraft box.\u003c\/p\u003e\u003ch2\u003eDoes it fit Dexter ABS or every 7K axle?\u003c\/h2\u003e\u003cp\u003eNo. Lippert expressly excludes Dexter ABS. Match the original axle and spindle, bearing and seal requirements, 12-inch brake hub, 8 on 6.5-inch wheel bolt pattern, 9\/16-inch studs, 16 to 17-1\/2-inch wheel range and Lippert ABS electric-brake system. Capacity and bolt pattern alone do not establish fit; generic universal-fit wording does not override these limits.\u003c\/p\u003e\u003ch2\u003eIs this a complete ABS system?\u003c\/h2\u003e\u003cp\u003eNo. The hub has tone-ring teeth for the existing Lippert ABS sensor. An ABS sensor, control module, wiring, brake backing-plate assembly, wheel and complete axle are not listed as included. The 7,000-pound figure is the axle application, not an additional load rating per hub.\u003c\/p\u003e\u003ch2\u003eWhich bearing numbers and installation settings apply?\u003c\/h2\u003e\u003cp\u003eThe exact page confirms pre-greased installed bearings and sealed grease lubrication, but does not identify the complete bearing and seal part numbers, stud thread pitch, lubricant grade, preload, lug torque or sensor gap. Use the original axle and ABS service instructions and a qualified trailer technician; do not infer these settings from similar hubs or photographs.\u003c\/p\u003e\u003ch2\u003eIs this a threaded-cap or hybrid hub?\u003c\/h2\u003e\u003cp\u003eThis exact page specifies a press-in dust-cap interface and 7,000-pound axle application. The 8K hybrid-threaded and standard-threaded ABS hubs are separate configurations; a similar appearance or stud diameter does not make them interchangeable.\u003c\/p\u003e\u003ch2\u003eWhat does the country-of-origin information show?\u003c\/h2\u003e\u003cp\u003eLippert's specification table lists Country of Origin: USA, while its product photo shows CHINA cast into the hub and marked on the bearing. Those source details conflict. Origin for a particular supplied kit or component is not confirmed; verify the actual product markings if origin is a purchase requirement.\u003c\/p\u003e\u003ch2\u003eAre installation documents linked?\u003c\/h2\u003e\u003cp\u003eThe focused page links Lippert's general support homepage without an exact kit PDF. Its general hub-replacement article does not establish the exact bearing, spindle, torque or ABS adjustment requirements for this part.\u003c\/p\u003e\u003ch2\u003eAre the listed dimensions installed measurements?\u003c\/h2\u003e\u003cp\u003eNo. The 15.5 x 14 x 7.5-inch dimensions and 38.5-pound weight describe the shipping package. Installed width, offset, spindle diameter and bearing bores are not established by those package figures.\u003c\/p\u003e\u003ch2\u003eWhich OEM or replacement number should I match?\u003c\/h2\u003e\u003cp\u003eMatch Lippert SKU 2025077672 and UPC 848150077844 alongside the original axle identification. The focused page names no separate OEM cross-reference, superseded part number or exact parent axle SKU.\u003c\/p\u003e\u003ch2\u003eCompare Other Configurations\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-abs-8k-hybrid-threaded-brake-hub-kit-black-9-16-in-studs-2025077675\"\u003eblack 8K hybrid-threaded ABS kit 2025077675\u003c\/a\u003e is a separate axle and cap configuration. The \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-abs-8k-threaded-brake-hub-kit-black-9-16-in-studs-2025077678\"\u003eblack 8K standard-threaded kit 2025077678\u003c\/a\u003e uses another configuration. Compare exact specifications; neither is an established substitute for this 7K press-in-cap kit.\u003c\/p\u003e\u003cp\u003eManufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":68039119339672,"sku":"2025077672","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0346\/2397\/9579\/files\/2025077672_Lippert_LippertABS12RedBrakeHubCompleteKitwithInstalledBearings7000lb_0_1_1.jpg?v=1794884729","url":"https:\/\/elkhartrvparts.com\/products\/lippert-abs-7k-brake-hub-kit-red-9-16-in-studs-2025077672","provider":"Elkhart RV Parts","version":"1.0","type":"link"}