{"product_id":"lippert-8-000-lb-slipper-leaf-spring-6-leaves-3-x-30-1-2-in-353498","title":"Lippert 8,000-lb Slipper Leaf Spring, 6 Leaves, 3 x 30-1\/2 in - 353498","description":"\u003cdiv\u003e\u003cstrong\u003eElkhartRVParts.com - The Only Authorized Place for Lippert RV Parts\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cstrong\u003e100% Verified Authentic OEM Grade Part\u003c\/strong\u003e\u003c\/div\u003e\u003ch2\u003eLippert 8,000-lb Slipper Leaf Spring, 6 Leaves, 3 x 30-1\/2 in - 353498\u003c\/h2\u003e\u003cp\u003eLippert 353498 is a six-leaf steel slipper spring with an 8,000-pound spring-assembly capacity. It has a single-eye design, a listed width of 3 inches and listed length of 30-1\/2 inches. The flexible leaves help absorb road shock and vibration to reduce strain on a matching trailer suspension.\u003c\/p\u003e\u003cp\u003eThis listing supplies one slipper leaf spring with the eye bushing pre-installed. It requires suitable pre-mounted hangers; hanger kits are sold separately. Match the original equipment label and suspension geometry before ordering. The 8,000-pound figure rates this spring assembly and does not independently establish axle capacity, trailer gross weight rating or an approved suspension upgrade.\u003c\/p\u003e\u003ch2\u003eWhy Choose This Slipper Spring?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-eye slipper design:\u003c\/strong\u003e one spring eye and one slipper end for the matching suspension arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix steel leaves:\u003c\/strong\u003e flex to absorb road shock and vibration during trailer use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined spring rating:\u003c\/strong\u003e 8,000-lb spring-assembly capacity, subject to the original suspension requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference dimensions:\u003c\/strong\u003e 3-inch width and 30.5-inch listed length; verify the source's measurement convention on your original.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentification references:\u003c\/strong\u003e Standens 72-46 and Lippert's listed Dexter-compatible number 072-046-00.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-installed bushing:\u003c\/strong\u003e spring eye bushing included; hanger kits are separate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine replacement:\u003c\/strong\u003e Lippert part 353498 with a limited one-year warranty under the manufacturer's terms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 353498\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lippert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Capacity:\u003c\/strong\u003e 8,000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandens Leaf Spring Number:\u003c\/strong\u003e 72-46\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Layer Count:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye To Eye Length:\u003c\/strong\u003e 30.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Spring Type:\u003c\/strong\u003e Slipper Leaf\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Arch Length:\u003c\/strong\u003e 2.75\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Type:\u003c\/strong\u003e Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Type:\u003c\/strong\u003e Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure:\u003c\/strong\u003e EA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Length (Inches):\u003c\/strong\u003e 30.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Width (Inches):\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Term:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity In Package:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Type:\u003c\/strong\u003e Kraft Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDexter Compatible Part Number:\u003c\/strong\u003e 072-046-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 848150068804\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Dimensions:\u003c\/strong\u003e 41\" L x 20\" W x 10\" H, 55 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore You Order\u003c\/h2\u003e\u003cp\u003eReference the original equipment label, verify the single-eye slipper design, spring rating and width, and compare the original measurement method, bushing, hangers and hardware. Lippert's broad competitor-fit wording does not replace a dimensional match.\u003c\/p\u003e\u003ch2\u003eWhat comes with this spring?\u003c\/h2\u003e\u003cp\u003eOne slipper leaf spring is listed. Lippert says the eye bushing is pre-installed. Hanger kits are sold separately and suitable pre-mounted hangers are required. A pair of springs, U-bolts, spring plate, eye bolt, equalizer or complete mounting kit is not itemized as included.\u003c\/p\u003e\u003ch2\u003eIs 8,000 pounds the axle rating?\u003c\/h2\u003e\u003cp\u003eThe product page calls this an 8,000-lb spring assembly capacity. Do not treat that as a complete axle or trailer rating, double it to claim a suspension rating, or use it to increase the original gross vehicle weight rating. The axle, hangers, frame, wheels, tires and full suspension must retain their approved ratings.\u003c\/p\u003e\u003ch2\u003eWhy does the page say eye-to-eye when it has one eye?\u003c\/h2\u003e\u003cp\u003eLippert's title and specification call the length 30.5 inches eye-to-eye, while the quick facts and photos show a single-eye slipper spring. Preserve 30.5 inches as the published length, but confirm the exact eye-center-to-slipper measurement convention on the original spring before purchase. It is not a two-eye spring, and a second eye is not implied.\u003c\/p\u003e\u003ch2\u003eWhich cross-reference numbers apply?\u003c\/h2\u003e\u003cp\u003eLippert lists Standens leaf spring number 72-46 and Dexter compatible part number 072-046-00 for this SKU. These are identification aids: confirm the original label, spring style, dimensions, eye\/bushing size, mounting arrangement and load requirements. They do not establish compatibility with every Dexter or competitor axle.\u003c\/p\u003e\u003ch2\u003eWhat does the load arch specification mean here?\u003c\/h2\u003e\u003cp\u003eThe source lists Load Arch Length as 2.75, without an explicit unit or measurement method in that field. Confirm the unit and whether the original spring is measured loaded or unloaded before using that figure for fit. The page does not give the bushing bore, bolt diameter, leaf thickness or exact hanger spacing.\u003c\/p\u003e\u003ch2\u003eCan I use an equalizer just because it takes a 3-inch spring?\u003c\/h2\u003e\u003cp\u003eNo. Spring width alone does not establish the correct equalizer or hanger arrangement. Match axle spacing, original suspension design, spring-end geometry and hardware specifications. The related equalizers below are comparison resources with their own dimensions, not confirmed companion parts for every installation of this spring.\u003c\/p\u003e\u003ch2\u003eWhere can I find installation instructions?\u003c\/h2\u003e\u003cp\u003eThe page provides general support links, with no exact spring installation PDF linked. Use the trailer and suspension manufacturer instructions, including the correct support points, replacement hardware and fastener torque. Inspect and maintain the equipment periodically as Lippert directs. The page's generic DIY wording does not supply an installation procedure.\u003c\/p\u003e\u003ch2\u003eAre the shipping measurements the spring dimensions?\u003c\/h2\u003e\u003cp\u003eNo. Lippert lists the package at 41 x 20 x 10 inches and 55 pounds. The separate item dimensions are 30.5 inches long and 3 inches wide. Shipping measurements do not establish installed arch, eye diameter, hanger spacing or spring clearance.\u003c\/p\u003e\u003ch2\u003eCompare Suspension Components\u003c\/h2\u003e\u003cp\u003eFor research, compare the \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-slipper-leaf-spring-trailer-equalizer-3-spring-width-42-1-4-axle-spacing-299015\"\u003e3-inch spring-width equalizer for 42-1\/4-inch axle spacing, 299015\u003c\/a\u003e and \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-slipper-leaf-spring-trailer-equalizer-3-spring-width-48-1-2-axle-spacing-299017\"\u003e3-inch spring-width equalizer for 48-1\/2-inch axle spacing, 299017\u003c\/a\u003e. Their shared spring-width designation does not establish that either fits this spring in your trailer; verify the full original suspension.\u003c\/p\u003e\u003cp\u003eManufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":68038347391128,"sku":"353498","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0346\/2397\/9579\/files\/353498_Lippert_LippertTrailerSlipperSpring8000lbSpringCapacity6Leaf3Widex3012Lon_0_1_1.jpg?v=1794865362","url":"https:\/\/elkhartrvparts.com\/products\/lippert-8-000-lb-slipper-leaf-spring-6-leaves-3-x-30-1-2-in-353498","provider":"Elkhart RV Parts","version":"1.0","type":"link"}