{"product_id":"lippert-abs-8k-hybrid-threaded-brake-hub-kit-red-9-16-in-studs-2025077677","title":"Lippert ABS 8K Hybrid Threaded Brake Hub Kit - Red, 9\/16-in Studs - 2025077677","description":"\u003cdiv\u003e\u003cstrong\u003eElkhartRVParts.com - The Only Authorized Place for Lippert RV Parts\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv\u003e\u003cstrong\u003e100% Verified Authentic OEM Grade Part\u003c\/strong\u003e\u003c\/div\u003e\u003ch2\u003eLippert ABS 8K Hybrid Threaded Brake Hub Kit - Red, 9\/16-in Studs - 2025077677\u003c\/h2\u003e\u003cp\u003eLippert 2025077677 is a red hybrid-threaded ABS brake hub complete kit for one wheel end on a matching 8,000-pound hybrid spring axle. It accepts a 12-inch brake, uses an 8 on 6-1\/2-inch bolt pattern and 9\/16-inch studs, and is listed for 16 to 17-1\/2-inch wheels. Its cast-in tone-ring teeth work with the existing Lippert ABS sensor and Lippert ABS electric brakes; it is not compatible with Dexter ABS.\u003c\/p\u003e\u003cp\u003eThe kit combines the brake hub with cap and spindle hardware for wheel-end service. Lippert describes the hybrid design as providing the same overhang as a standard 7,000-pound axle while using a larger outer bearing. That description does not make it a drop-in replacement for every 7K or 8K axle: match the original hybrid assembly, spindle, bearings, seals, wheel and ABS system before ordering. A complete brake, sensor, controller, wheel and axle are not itemized as included.\u003c\/p\u003e\u003ch2\u003eWhy Choose This Hybrid ABS Hub Kit?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid wheel-end design:\u003c\/strong\u003e accepts a 12-inch brake and provides Lippert's stated standard-7K overhang with a larger outer bearing; confirm the exact assembly match.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLippert ABS interface:\u003c\/strong\u003e cast-in tone-ring teeth work with the existing sensor and compatible Lippert ABS electric brakes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined fit:\u003c\/strong\u003e 8,000-lb hybrid spring axle application, eight studs on a 6.5-inch bolt circle and 9\/16-inch stud size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel range:\u003c\/strong\u003e listed for 16 to 17-1\/2-inch wheels with the matching 12-inch brake hub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable hub:\u003c\/strong\u003e red cast-iron construction with pre-installed races and corrosion-resistant zinc-plated studs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded cap interface:\u003c\/strong\u003e accepts Valcrum threaded dust caps; use the correct cap and service requirements for the original assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle wheel end:\u003c\/strong\u003e one hub kit in a kraft box, with a limited one-year materials\/workmanship warranty under Lippert's terms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 2025077677\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lippert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size:\u003c\/strong\u003e 9\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e ABS Compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Type:\u003c\/strong\u003e Hybrid Spring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle Capacity:\u003c\/strong\u003e 8,000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Style:\u003c\/strong\u003e Brake Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Bolt Pattern:\u003c\/strong\u003e 8 on 6.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Type:\u003c\/strong\u003e Hub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnit of Measure:\u003c\/strong\u003e EA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty Term:\u003c\/strong\u003e 1 Year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity In Package:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Type:\u003c\/strong\u003e Kraft Box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 848150077882\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Dimensions:\u003c\/strong\u003e 15.5\" L x 14\" W x 7.5\" H, 38 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore You Order\u003c\/h2\u003e\u003cp\u003eConfirm the original axle tag, hybrid hub geometry, bearing and seal numbers, brake size, wheel bolt circle, stud diameter and Lippert ABS system. A shared capacity or bolt pattern alone does not establish fit.\u003c\/p\u003e\u003ch2\u003eWhat is included?\u003c\/h2\u003e\u003cp\u003eThe written contents list names one ABS brake hub assembly, one dust cap with plug, one cotter pin, one six-slot castle spindle nut, one spindle washer and five 60-degree cone trailer lug nuts. The photos show eight lug nuts and the hub has eight studs. Confirm the supplied nut count and obtain the correct complete fastener set before installation. Races and studs are explicitly described as pre-installed; bearing and seal part numbers and installed-bearing status are not explicitly specified in the written list.\u003c\/p\u003e\u003ch2\u003eDoes it fit every 8K axle or Dexter ABS?\u003c\/h2\u003e\u003cp\u003eNo. Match the original Lippert hybrid spring axle, spindle, bearing and seal requirements, 8,000-pound axle application, 8 on 6.5-inch bolt pattern, 9\/16-inch studs, 12-inch brake and listed 16 to 17-1\/2-inch wheel range. Lippert expressly excludes Dexter ABS. Generic universal-fit language on the source does not override these specific restrictions.\u003c\/p\u003e\u003ch2\u003eHow does hybrid differ from standard threaded?\u003c\/h2\u003e\u003cp\u003eLippert states that this hybrid hub accepts a 12-inch brake, provides the same overhang as a standard 7,000-pound axle and has a larger outer bearing than standard axles. Exact bearing numbers and overhang measurements are not supplied. Standard-threaded 12-1\/4-inch ABS kits are separate configurations; do not substitute them based only on stud size, color or an 8K rating.\u003c\/p\u003e\u003ch2\u003eIs it a complete ABS conversion?\u003c\/h2\u003e\u003cp\u003eNo. It services one wheel end in an existing compatible Lippert ABS system. A sensor, ABS module, wiring, brake backing-plate assembly, wheel and complete axle are not listed as included. The 8,000-pound rating describes the axle application, not an added rating per hub.\u003c\/p\u003e\u003ch2\u003eWhich lubricant and cap should I use?\u003c\/h2\u003e\u003cp\u003eThe source confirms a Valcrum threaded dust-cap interface, but this exact page does not specify the service lubricant, oil or grease grade, fill level, or cap torque. Photos show bearing elements with red lubricant and a clear-window cap; those details do not establish a service procedure. Follow the exact axle, bearing, seal and threaded-cap instructions. Do not treat this threaded opening as a press-in dust cap.\u003c\/p\u003e\u003ch2\u003eAre installation instructions supplied on this page?\u003c\/h2\u003e\u003cp\u003eThe Product Support link opens Lippert's general support homepage; no exact kit manual is linked. Have a qualified trailer technician confirm spindle and bearing fit, ABS sensor alignment, brake adjustment, lubrication and fastener requirements using the original assembly instructions. No installation torque or bearing-preload procedure is inferred from generic hub instructions.\u003c\/p\u003e\u003ch2\u003eWhat measurements are provided?\u003c\/h2\u003e\u003cp\u003eThe listed shipping size is 15.5 x 14 x 7.5 inches with shipping weight 38 pounds. Those are package figures, not installed hub width, spindle diameter, bearing bores or offset. Confirm the original assembly separately when dimensional fit matters.\u003c\/p\u003e\u003ch2\u003eWhich part number and OEM references should I match?\u003c\/h2\u003e\u003cp\u003eMatch Lippert SKU 2025077677 and UPC 848150077882 along with the original axle identification. The focused source page names no separate OEM cross-reference, superseded part number or exact parent axle SKU. None is inferred from similar-looking hubs.\u003c\/p\u003e\u003ch2\u003eHybrid Color Option\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-abs-8k-hybrid-threaded-brake-hub-kit-black-9-16-in-studs-2025077675\"\u003eblack hybrid kit 2025077675\u003c\/a\u003e has the same published axle application, brake size, wheel range, bolt pattern and stud size. Each color retains its own SKU, UPC and shipping data. Confirm the original axle fit for either color.\u003c\/p\u003e\u003ch2\u003eCompare Other Configurations\u003c\/h2\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-abs-8k-threaded-brake-hub-kit-black-9-16-in-studs-2025077678\"\u003eblack 9\/16-inch standard-threaded ABS hub kit 2025077678\u003c\/a\u003e uses a different, 12-1\/4-inch brake configuration. The \u003ca href=\"https:\/\/elkhartrvparts.com\/products\/lippert-abs-8k-threaded-brake-hub-kit-red-9-16-in-studs-2025077679\"\u003ered standard-threaded 9\/16-inch kit 2025077679\u003c\/a\u003e is another separate configuration. Compare specifications; neither standard-threaded kit is established as interchangeable with this hybrid kit.\u003c\/p\u003e\u003cp\u003eManufacturer warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Lippert","offers":[{"title":"Default Title","offer_id":68038352404632,"sku":"2025077677","price":237.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0346\/2397\/9579\/files\/2025077677_Lippert_LippertABS12RedHybridThreadedBrakeHubCompleteKit8000lbAxles8o_0_1_1.jpg?v=1794865682","url":"https:\/\/elkhartrvparts.com\/en-ca\/products\/lippert-abs-8k-hybrid-threaded-brake-hub-kit-red-9-16-in-studs-2025077677","provider":"Elkhart RV Parts","version":"1.0","type":"link"}